Build an AR

With so many aftermarket parts, it is fun to tinker with the platform. My recommendation is that if you customize — and you know you will — first determine how the rifle will be used.

An adjustable gas block lets you turn down how much gas reaches your AR’s bolt carrier. A fixed block sends the same amount every shot, and most factory rifles are set up a little overgassed so they run on anything. Turn the gas down and the rifle cycles softer, throws less gas back in your [...]

Building an AR is a great way to learn more about the platform, and move from a casual enthusiast to a more informed and invested member of the gun community.

Warning: M&M’s, Reeces Pieces, and all chocolate-based candies should never be stored in your Magpul grip or stock during summer matches.  Despite the candy coating, they will melt. 

Accuracy was the number one goal Jon had when he created Helix 6 Precision. And although Beagle must be cautious about sharing his manufacturing process, the high carbon-to-resin ratio is part of the magic.

I set out to build the Ultimate 3 Gun Rifle, and I did. But I also accidentally built a rifle capable of PRS competition and hitting targets past 1000 yards.

Part 3 of the Ultimate 3 Gun Rifle

Originally, I set out to build an upper solely to test the Bergara 20” AR-15 barrel so I was not looking to spend a ton of money on a new handguard.  After a failed start using a free float tube that I got on sale I was on the hunt for something that was affordable, free floating, and modular. 

Recent events have created a new round of panic buying of AR-15 rifles and parts kits. As companies race to meet demand, a lot of substandard parts end up in the hands of consumers. End users are often left frustrated when their new parts kit does not snap together like Legos or that factory gun they got a screaming deal on fails to feed or extract. But not to worry…! This article will cover the four most common issues I have personally seen with “panic AR-15’s” and how to correct them.