The PX-5.7 Pistol from SDS Arms

in Gun Reviews, Handguns, Pistols
Shooter with PX-5.7 pistol from SDS Arms
Running the PX-5.7 OR chambered in 5.7x28mm, imported by SDS Arms.

Estimated reading time: 9 minutes

When I attended the 5.7 Fest last year to learn about the capabilities of 5.7x28mm ammunition, I ran 150 rounds of 5.7x28mm ammunition through the Tisas PX-5.7 semi-automatic pistol. It proved itself a solid, reliable firearm during my shooting. 

Then, I watched two other event participants blast off 500 rounds through one of the PX-5.7’s that already had hundreds of rounds shot through it. The pair of shooters kept slapping in full mags and firing them off. In seven minutes of steady shooting, they burned through the 500 rounds; the pistol experienced zero malfunctions and shots were consistently on target.

Sure, the end of the PX slide and barrel were hot enough to second-degree burn your skin. Expected. But the gun itself functioned fine.

Impressed, I asked Jahred Gamez of SDS Arms, who also attended the 5.7 Fest and had invited me to the event, if I could get a PX-5.7 to test and evaluate for a review. SDS Arms is the sole importer of this pistol. No, he said. 

“We have a new version arriving soon,” Gamez explained. “The PX-5.7 OR, an optics ready model, and I’d like to send that one to you. Okay?”

Okay!

Intro to the PX-5.7 Pistol

The PX-5.7 OR is manufactured in Turkey by Tisas and imported exclusively into the United States by SDS Arms.

Available on GunsAmerica Now

https://gunsamerica.com/listings/search

Chambered in 5.7x28mm, the pistol featured a 4.80-inch steel barrel with a sleek black finish, and a carbon steel slide. Poly framed and striker fired, the pistol sported both an accessory rail under the barrel and a beavertail at the rear for comfort and control while shooting. Black, interchangeable backstraps were included for a more tailored fit.

carbon steel slide and poly framed barrel pistol from SDS Arms
The PX-5.7 OR features a carbon steel slide and barrel on a poly frame.

Optics ready, but the open sights worked fine for me at the 5.7 Fest. The fiber optic front sight provided quick target acquisition, while the rear blade notch was generous and lined up with the fiber optic dot quickly.

Ammunition capacity is 20+1. With an extra magazine on hand, that’s 41 rounds. Need more ammo? Better get a SAW.

20+1 ammo capacity magazine
A pistol with a 20+1 ammo capacity? Yes, please!

The PX-Tisas magazines were steel, with round cutouts along the sides.

ZeroTech Option

An OR model pistol required an optic.

I selected the Thrive HD 1×21 Micro Reflex Sight made by ZeroTech Optics. The Thrive HD featured a 3 MOA red dot and 10 brightness levels, operated on one CR2032 battery and was built on the RMSc optic footprint. Waterproof and fog-proof, the optic’s elevation and windage controls provided 60 MOA of adjustments each.

PX-5.7 pistol with 3 MOA red dot mounted
The ZeroTech Thrive HD red dot was a fine addition to the pistol.

To mount the ZeroTech, I removed the optic cover plate at the rear of the pistol slide using the Tisas-provided torque wrench. This revealed the RMSc cut to the slide; the Thrive HD fit right onto the cut.

Of note, Tisas also supplied an adapter plate for an RMR foot-printed optic.

5.7 Ammo

I used a variety of 5.7×28 ammo brands. 

4 bullet types
From left to right: .22 WMR, 5.7x28mm, 380 AUTO, 9mm.

I ran Federal Ammunition American Eagle loaded with a 40 grain, full metal jacket (FMJ) bullet. Plus, I used Fiocchi USA Hyperformance, and a 35-grain jacketed frangible, and Fiocchi USA Hyperformance and a 40-grain tipped hollow point.

Also included were Hornady Critical Defense, 40 grain FTX poly tipped bullet, and Speer Ammunition Personal Protection, 40 grain Gold Dot hollow point. 

Shooting with My PX-5.7 and a Thrive HD

At my outdoor range, the Thrive HD zeroed quickly.

For my accuracy testing, I shot at seven yards offhand and at 20 yards from a rest. At the seven-yard mark, all of the 5.7 ammo brands pegged five shot groups at 1.0 inches and under. There were larger groups, of course, up to 1.5-inches, and I credited those to myself.

While the pistol and the various ammo brands all matched up nicely, the PX-5.7 OR and the Fiocchi Hyperformance 35 grain loads loved each other. My best five shot groups with this load came in at just .60 inches.

PX-5.7 pistol with 5.7x28 ammo and target
Fiocchi Hyperformance 35 grain ammo at seven yards offhand.

At one point, I had the first four rounds of 35 grain Hyperformance touching, later measured at .40-inches, and then I choked and pulled shot #5 for a total group of .85-inches. Damn!

Federal ammo and pistol
American Eagle pegged this .80” group at seven yards.

The Hornady Critical Defense and the 40-grain Hyperformance made .90-inch groups, too.

At 20 yards and a rest, all of the ammo brands produced five shot groups of 2.5- to 3.0-inches. I had nine rounds of Hornady Critical Defense left in one box, shot off all nine at this distance and they made a 2.4-inch group.

target with 9 bullet holes with Hornady Critical Defense ammo and PX-5.7 pistol
Hornady’s Critical Defense at 20 yards.

Once again, Fiocchi’s 35-grain round topped all others, with 10 shots at just 1.9 inches.  

Fiocchi 5.7x28 ammo and pistol on target
At 20 yards, 10 rounds of Fiocchi Hyperformance 35 grain for 1.9”.

Obvious conclusion: with these 5.7×28 ammo brands, the PX-5.7 OR is more than accurate enough for self- and home-defense, plinking and varmint control.

Speer Gold Dot ammo and pistol on target
Very accurate at seven yards: Speer Gold Dot.

Other PX-5.7 Features

As centerfire handgun rounds go, recoil shoving back into the hand and hard is not a concern with the 5.7×28. But given its relatively high velocity, in the neighborhood of 1,800 feet per second at the pistol’s muzzle, snappy muzzle rise occurs, especially when hammering out shots.

poly textured grip on SDS Arms pistol
The pistol’s poly grips sported a deep texturing for a solid hold.

The PX-5.7 OR handled this muzzle rise potential fine thanks to deep texturing on the poly grips and a nicely undercut trigger guard. The pronounced beavertail at the rear of the frame added to my stability while shooting.

undercut for stability on pistol
Generous grip undercut added to shooting stability.

The striker-fired trigger had a spongy feel, but the flat-faced trigger did smooth out the 3.0-pound trigger pull.

Bladed red trigger safety on PX-5.7 pistol from SDS Arms
The PX-5.7’s bladed trigger safety.

READ MORE: The Future Of Military Firearms – Farther, Faster, Deadlier

The pistol incorporates an accessory rail for lights and lasers. The magazine well sports a wide opening for easy magazine insertion, too.

Next Gen

Gamez tells me SDS Arms is importing an even newer version of the PX-5.7 OR soon, this one with a threaded barrel for use with a suppressor. Which should provide another quality option for this caliber and at a reasonable price.

front iron sight and threaded barrel above engraving of PX-5.7 pistol
The next-gen PX-5.7 will feature a threaded barrel.

SPECS: Tisas PX-5.7 OR Pistol

Importer: SDS Arms
Caliber: 5.7x28mm

Capacity: 20+1
Barrel Length: 4.80″

Barrel Material: Carbon Steel
Barrel Finish: Black

Frame: Polymer
Frame Finish: Black Tenifer
Slide Material: Carbon Steel
Slide Finish: QPQ Tenifer Cerakote
Grips: Textured Poly, Black w/Interchangeable Backstraps
Sights: Fiber Optic Front, Notched Rear Blade
Trigger: Flat Face

Safety: Trigger Style

Length: 8.6”

Height: 5.6”

Weight: 26.5 oz, Unloaded
MISC: Accessory Rail, Slide Serrations, Optics Ready, Owner’s Manual, Cable Lock. 

MSRP: $445.99

SDS Arms

*** Buy and Sell on GunsAmerica! ***

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Chris Baker May 23, 2025, 7:41 pm

    I’ll never buy one with that type of trigger. Call me old fashioned but I like a single piece trigger enough that that type of trigger will stop me from buying any gun no matter how good it shoots.

  • Stanton John Shiver May 23, 2025, 11:09 am

    Give me the Smith & Wesson 5.7×28 all day long. It’s a bit more money but the Tempo barrel system is the best! Also has a threaded barrel so what a package. I’m now a full believer of the 5.7×28 I got rid of all my .223 AR-15’s and AK-47’s. I paired this pistol with the KelpTek R-50 with the 50 round magazines. It also has a threaded barrel. Together it’s the best round and platforms. The cost of sub-sonic ammo has come down under 50 cents a round and I no longer have to worry about blowing my eardrums out if something goes bump in the night and I have to use a weapon! 5.7×28 is the goldielocks round it’s perfect all around caliber for today’s use!

  • Kenneth Meyers May 20, 2025, 10:56 pm

    Do they have the threaded barrel yet???????????

  • ejharbet May 20, 2025, 2:51 am

    when they make this ammo to the same price zone as 9×19, people will have 3 options in handguns. 5.7 has always been interesting. high velocity,flat shooting. I never sensed any recoil to speak of.

  • MeSeaHunt May 19, 2025, 10:17 am

    while it is not the greatest quality fit/finish, it WILL get the job done…
    my only complaint is the metal magazine, could have selected better to keep the weight down and made em’ more readily avail not to mention they do not have any others with greater capacity….
    out of all the 5n7’s avail this would be last choice on my list…

  • will wallace May 19, 2025, 8:22 am

    is the mag interchangeable with any other 5.7’s?