Estimated reading time: 8 minutes
Noisefighters MAX14 is a tiny, 7075-T6 aluminum hammer that reduces your helmet height, speeds up stow and eye swaps, and locks up like it means business.
MAX14 Overview: Lightweight, Rigid, Ready to Work
Noisefighters has been pushing the night vision accessory market forward for years, and their MAX14 mount continues that momentum with a lightweight, rigid, and highly functional design. Built from 7075-T6 aluminum and weighing only 1.0 ounce, the MAX14 cuts the weight of a traditional polymer Milspec J-arm in half while adding noticeably more capability. It is designed for both the AN/PVS-14 and the Nocturn Industries TANTO monocular. It also snaps directly into any dovetail-style mount, such as the Wilcox G24 or new Noisefighters ALPHA mount. At an MSRP of $225, it offers a substantial upgrade in durability, adjustability, and stowing options compared to legacy systems.
Table of contents
- MAX14 Overview: Lightweight, Rigid, Ready to Work
- Concept: Side-Stow Control That Solves Tall-Helmet Pain
- Mount Details: Solid Feel, Smooth Knuckle, Zero Slop
- Fit And Finish: Premium Feel At One Ounce
- Field Use: Lower Profile, Faster Swaps, Fewer Headaches
- Specifications: Noisefighters MAX14 PVS-14 Mount
- Pros And Cons: Real-World Wins And Minor Quibbles
- Final Thoughts: A Modern Standard For PVS-14 Mounts
- Related Reads From GunsAmerica Digest
Concept: Side-Stow Control That Solves Tall-Helmet Pain
Noisefighters set out to build a modernized J-arm that retains the simplicity of the original Milspec design while solving its most persistent problems. The centerpiece of the MAX14 is an articulating knuckle that allows the monocular to rotate away from the eye or tightly stow against the side of the helmet, drastically reducing overall height. The friction-based adjustment system makes switching from the left to the right eye seamless, and the slight rearward sweep of the inner arm brings the eyepiece closer for improved alignment.
Where traditional J-arms either hang in front of your face or must be flipped completely over the top of the helmet, the MAX14’s articulating design gives users a third option, a low-profile, side-stowed position that stays out of the way without adding height. For anyone who regularly moves through buildings, vehicles, or tight spaces, this is a huge advantage.
Out of the box, the MAX14 comes with a UANVM “Tanto” adaptor, an oversized NV screw, and a titanium slotted screw.
Mount Details: Solid Feel, Smooth Knuckle, Zero Slop
The MAX14 features a rigid, all-metal construction with smooth, consistent movement thanks to the knuckle’s metal washer stack. Every rotation point has a solid, positive feel without unwanted slop, and the tension remains steady even after extended use. During nighttime use, riding on a side-by-side or hiking through fields, the mount stayed firmly in place. When properly tightened, it did not work loose, maintaining the retention level throughout multiple nights out hunting coyotes and wild pigs. While I have not subjected it to any major impacts yet, the MAX14 gives a more confidence-inspiring impression than polymer options, including Noisefighters’ previous AX14 Pro.
The arm’s geometry also plays an important role. The rearward sweep improves eye relief positioning, and the interpupillary adjustment range is wide enough to find a perfect fit in seconds. In practical use, swapping the monocular from one eye to the other is just as fast. I can do it in a matter of seconds with no tools and no reconfiguration of the helmet.
A rear-mounted tether point offers an extra measure of security, and the entire package locks solidly into place on any standard dovetail mount.
It also comes with an oversized screw to hold the NV in place. While I did not have trouble with the installed screw working loose, having the oversized screw would allow for quickly torquing down your NV if it ever worked loose. It would also allow for quicker takedown if you ever wanted to remove your NV from the mount entirely.
Fit And Finish: Premium Feel At One Ounce
Despite weighing only an ounce, the MAX14 feels like a premium component throughout. Machining is clean and crisp with no rough edges, and the friction adjustments offer just the right amount of resistance. Noisefighters also offers a vinyl wrap option to customize the appearance of the mount. I chose the MultiCam Arid pattern, and installation took roughly ten minutes while following their instructional video.
The wrap is non-permanent, adhesive-backed, and precisely cut so each piece fits cleanly around the contours of the mount. It adds a nice touch of personalization without affecting function.
Field Use: Lower Profile, Faster Swaps, Fewer Headaches
One of the biggest frustrations with standard Milspec J-arms is how tall they are when stowed. If you run a PVS-14 and you are tall, driving becomes a hassle. I have had to lower the seat and hunch over to keep the unit from hitting the roof of the vehicle. Indoors, traditional J-arms sit high enough on me to catch doorframes unless I deliberately duck every time. This adds unnecessary risk of injury or damage.
The MAX14 eliminates all of those issues. Being able to rotate the monocular up toward my eyebrows rather than flipping the entire mount skyward completely clears my vision without raising the overall height of my helmet. The result is a dramatically lower profile. This stowed footprint is not only one of the MAX14’s strongest features, but it is also one of the biggest selling points for anyone who has experienced the limitations of legacy J-arms. Being able to quickly swap NV between eyes is also a huge benefit.
During use on a side-by-side, the mount stayed securely tensioned without working loose. There were no rattles, shifts, or unwanted movement. It remained comfortable throughout long nights, and the articulating knuckle consistently allowed smooth transitions between active viewing, momentary stowing, and left or right eye switching.
Specifications: Noisefighters MAX14 PVS-14 Mount
| Model | Noisefighters MAX14 |
|---|---|
| Material | 7075-T6 aluminum |
| Weight | 1.0 oz |
| Interface | Dovetail, compatible with Wilcox G24 and ALPHA |
| Optic Compatibility | AN/PVS-14, Nocturn Industries TANTO |
| Adjustment | Articulating knuckle with friction-adjust pivots |
| Tether | Rear-mounted tether point |
| Included | UANVM “Tanto” adaptor, oversized NV screw, titanium slotted screw |
| MSRP | $225 |
Pros And Cons: Real-World Wins And Minor Quibbles
- Pros: Ultra low stowed height for vehicles and doorways, smooth eye swaps in seconds, rigid 7075-T6 build with confident lockup, precise friction control, only 1.0 oz.
- Cons: Metal build inspires confidence, but I have not drop-tested it yet. Vinyl wrap adds style, but not function; learning the sweet spot on tension takes a minute.
Final Thoughts: A Modern Standard For PVS-14 Mounts
The Noisefighters MAX14 sets a new standard for what a modern PVS-14 mount should be. It is more compact, more adaptable, and more durable than the legacy J-arms it replaces. In my experience, it feels more robust as well. The extremely low stowed profile alone makes it worth the upgrade for users who operate around vehicles, doorways, or any environment where overhead clearance matters.
With lightweight construction, easy left-to-right swapping, excellent retention, and thoughtful ergonomics, the MAX14 delivers meaningful improvements at a reasonable MSRP of $225. For anyone running a monocular today, this is an upgrade that is immediately noticeable the moment you clip it into a G24 and start moving.
Related Reads From GunsAmerica Digest
- More Night Vision And Optics Coverage
- Essential Gear Reviews And Field Use
- Latest From GunsAmerica Digest
Available on GunsAmerica Now
Mitchell Graf is a dedicated hunter, competitive shooter, and firearms enthusiast. As a former instructor and president of Oklahoma State’s Practical Shooting Team, he has a strong foundation in marksmanship and competition shooting. These days, he spends as much time as possible chasing pigs and coyotes with night vision and thermal optics.
When he’s not in the field or on the range, Mitchell works as a full-time Mechanical Engineer in the Aerospace and Defense industry and manages a part-time farming operation. Whether he’s behind a rifle, designing parts, or working the land, his drive for precision and performance remains the same.
Experience:
– Mechanical Engineer – Full-time professional in the Aerospace/Defense industry.
– Competitive Shooter & Instructor – Former President and Instructor of Oklahoma State’s Practical Shooting Team.
– Night Vision & Thermal Hunter – Passionate about night time predator and hog hunting.
– Part-Time Farmer – Working to provide for my family, and raise food for this great nation.