Estimated reading time: 9 minutes
It’s official. Tactical lever-action rifles are a thing. Whether you call it dark, paint it black, or put an X in the model name, lever-actions are evolving into more practical versions of what our great-grandfathers used. And like an AR-15, lever actions are being equipped with M-LOK rails and muzzle devices to enhance usability. Perhaps it’s a way to thumb your nose at tradition, or maybe just a way to save a tree by using a polymer stock and aluminum rail in place of wood. The LEVTAC-92 is an excellent example of this new breed of lever-action rifles. It’s a Winchester Model 1892 clone reconfigured with modern and more practical features.

Table of contents
LEVTAC-92 – Lever Action From Brazil
The LEVTAC-92 fits in under the Citadel brand from Legacy Sports, and it’s a clone of the classic Winchester Model 1892. It is made in Brazil by CBC, which is a large ammunition and firearms company. They own Taurus and Rossi. When you pick up the LEVTAC, the first thing you notice is the aluminum rail and threaded muzzle. You might also notice how compact the rifle is and how fast it shoulders. The balance is toward the muzzle. It weighs less than five pounds unloaded and is less than a yard long; 33.7 inches to be exact.

It’s equipped with a 16.5-inch barrel that is threaded for a suppressor, compensator, or muzzle brake. An aluminum rail with M-LOK slots replaces what would have been a wood forend on a traditional ’92. The stock is polymer and lightweight, so that’s why the rifle is muzzle heavy. I figured the weight at the muzzle end would help with recoil recovery. The recoil pad is rubber with rounded edges so it doesn’t snag on clothing when shouldering it.
The LOP and the Stock
The length of pull (LOP) is 13 inches, which is on the short side, but because the lever loop is oversized, it has a longer arc to cycle. The shorter LOP ensures the user doesn’t have to reach during the opening stroke of the lever. This makes the rifle more shooter-friendly. In colder weather, the shorter LOP also allows for bulkier clothing. The drop on the stock is not steep either. Some lever actions have a steep drop on the heel, which makes using an optic difficult because you can’t get a good cheek weld when aiming with the red dot. The LEVTAC’s stock was designed for use with optics. Sling studs are fixed to the rail and stock.

The Sights
Open sights consist of a brass bead post front that’s dovetailed into the barrel and is adjustable for windage by way of a tap from a brass or nylon hammer. The rear sight is a useful peep sight that’s fully adjustable via a ramp to slide up and down depending on where you need to zero. The peep is mounted to a Picatinny-style rail. The way the sights are situated on the barrel, they provide a maximum sight radius, and therefore are super easy to acquire and fast on the follow-up shot. Nice sights for close to medium range shots. The rail itself is ideal for a scout-style scope or a red dot optic. I chose to mount a Steiner MSP micro pistol sight.

The Action
The large lever loop looks cool and is glove-friendly. Like all Model ’92s, it has an exposed hammer with a half-cock hammer position that blocks the trigger. And like all ‘92s from Brazil, the LEVTAC-92 has a manual safety on the top of the bolt that blocks the hammer from hitting the firing pin. With the safety on and the hammer fully cocked, you can pull the trigger and the hammer will drop. You might think you had a misfire if you aren’t paying attention. It is the safety doing its job. For me, the safety of the LEVTAC stands out like a wart. It’s good to have the added safety, but common sense should prevail.
Available on GunsAmerica Now

Both the stock and the rail on my gun wear Legacy Sports Vector Camo. You can get a finish called Respect, which is a pattern of the American flag. And—you guessed it—you can get it in all black. Caliber choices are 22 WRM, 357 Magnum, 45 Colt, and 44 Magnum. My gun is chambered in 357 Magnum.

Lever-Action Ready: Closed Emitter Red Dot
The Steiner MPS is a compact, closed-emitter red dot designed for pistols, offering 1x magnification and protection against water, snow, and debris. Its 3.3 MOA dot has eight brightness settings, adjustable via side buttons. The MPS clamps to a pistol plate, but for the LEVTAC’s Picatinny rail, you used the Reptilia Low Mount. Also compatible with the Aimpoint Acro, this mount keeps the optic low, ideal for cheek weld and alignment on a lever-action, unlike the higher mount needed for an AR-15. The setup worked perfectly.

LEVTAC-92 In Action
The trigger pull measured 5.7 pounds. It had a slight amount of creep and broke fairly crisp. It was, however, predictable, and at 50 yards, I can’t argue with 3-shot groups that ranged from less than an inch to under 2 inches. I tested three brands of .357 Magnum ammo: Hornady Critical Defense with a 125-grain FTX bullet, Blazer Brass with a 158-grain JHP, and Armcor with a 158-grain FMJ. Some .38 Special also went through the LEVTAC—Speer Gold Dot 125-grain GDHP. It seemed like a good mix, maybe a bit heavy on defense ammo, but this is a tactical lever-action, right?

At the bench and using a rest, the 38 Special Gold Dot gave me a best 3-shot group that measured 0.80 inches; the average was 0.82. Now that’s some fine shooting with a proven defense load. The Gold Dot had 1127 fps muzzle energy and 381 ft-lb. Recoil was nil.

Accuracy
The best 50-yard group with 357 Mag ammo came from Hornady Critical Defense; it measured 1.3 inches and averaged 1.5 inches. The Hornady was the hottest 357 Mag loads, too, with a muzzle velocity of 1696 fps and muzzle energy of 798 ft-lb. Next best was Blazer Brass with a best of 1.4 inches and an average of 1.6 inches. Armscor training ammo had a best of 1.6 and an average of 1.8 inches. Overall accuracy was good from the bench. However, shooting a lever-action from the bench is like riding a horse inside a stall.
At 15 yards, I fired off-hand, running the LEVTAC as fast as I could while aiming at USPSA targets. The LEVTAC cycled smoothly, and I was able to squirt lead down range with speed and accuracy. The weight at the muzzle helped to reduce recoil, and the red dot allowed for easy aiming with both eyes open.
Loading the LEVTAC was smooth. Cartridges pushed fairly easily into the magazine tube. Recoil was more noticeable with the 357 Mag ammo, but very tolerable.

READ MORE ABOUT TACTICAL LEVER ACTIONS HERE: Tactical Lever Action Rifles
LEVTAC-92 – Worth Getting
This rifle was a lot of fun to shoot, and it is easy to shoot well. Not only is it compact and easy to operate, but it also packs a punch with 357 Mag ammo. The long barrel on the LEVTAC enhances the 357 Mag round’s speed and power. I would not think twice about hunting deer or pigs with the LEVTAC as long as I used the right bullet and the range was under 100 yards. If I used this rifle for defense or a truck gun, I’d add a tactical light to the rail in a heartbeat. For all its modern looks, the LEVTAC is outfitted with practical features. The tactical lever-action is here.
*** Buy and Sell on GunsAmerica! ***

What’s next? A Kentucky long rifle with camo and a flash hider? Or a Mossy Oak blunderbuss? Pure stupidity!
My God, is there anything that is not TACTICAL anymore? I’m so sick of every other new piece being designated as tactical. How about that new tactical single shot 12 ga. and it’s accompanying red dot tactical sight with the new revolutionary tactical skeleton stock and tactical threaded barrel? I can’t wait.
well labeling it tactical just increased the price by a few hundred bucks and increased their selling power so the amateurs will buy it.
I was the very same thing. It s comical the things the word “tactical” is attached to anymore.
I was the very same thing. It s comical the things the word “tactical” is attached to anymore.
The ‘92 platform is proven and reliable. I suspect this gun is a direct clone of the Rossi ‘92 which means there are parts available on the interweb to slick up the action on this gun. Before repros of the 66 and 73 became what they are today the 92 was the go to gun for cowboy action shooters. Not sure what the status is of Steve’s Gunz but Steve used to slick up these guns, including removing that pesky safety. I believe you can still order those parts kits. While that big lever loop looks cool and evokes images of True Grit, the reality is that it is not as efficient to run as a standard lever and if a shooter has visions of spin cocking they should have a replacement lever on hand because the weight of that gun on a spin cocking, especially if the gun is all tricked out on that rail is going to bend that lever. How do I know? I have an old 16” barrel R92 and realized one day it worked fine before spin cocking and then didn’t. Not only is it a dangerous thing to do it’s too hard on the gun so we are now sporting a gold lever, which was the only replacement I could find at the time. Cheers! Pop
Give me an original Winchester 1886, 1873, or pre-64 model 94 any day. “Technology” isn’t always what it’s cracked up to be. Nostalgia and originality are always worth the increased cost. Too much effort to “improve” on things that have served rifle owners for years, decades, and centuries.
IMO another silly marketing ploy.
I will take that little wart safety over the rebounding hammer any day. The rebounding hammer leads to a god-awful trigger pull. I have an 1892 Miroku Winchester in .45 Colt, and aside from the trigger, it is light, accurate, and fun to shoot. My son’s girlfriend, a complete newbie, had no issues shooting it whatsoever. Add to that, they are significantly less mechanically complicated and far more robust compared to the 1873, thanks to John Browning.