EOTech 4-12×36 Vudu: Compact FFP Scope — SHOT Show 2026

in Riley Baxter, SHOT Show 2026

Estimated reading time: 4 minutes

EOTech expands the Vudu lineup with the 4-12×36, a compact first focal plane optic that blends LPVO flexibility with precision capabilities.

Side view of a black compact scope on a tan AR style rifle.
The 4-12×36 FFP Vudu is tiny, and looks even smaller in person. This optic is incredibly versatile with its small footprint and lightweight design.

What’s New With the 4-12×36 Vudu

The biggest change desired from users of the earlier Vudu models is the reticle system. Unlike the 3-9x version, the 4-12×36 uses a first focal plane reticle. That means subtensions stay accurate across the entire magnification range for accurate, fast holdovers.

A compact optic lays in the palm of a man's hand and the elevation turret is uncapped.
The 4-12 Vudu’s elevation and windage turret is capped, but can be accessed if the situation requires manual adjustments.

EOTech built this optic to sit between traditional LPVOs and fixed-power combat optics. It doesn’t chase extreme magnification. Instead, it focuses on versatility in a small package. Shooters can run it on carbines, SPR-style rifles, or lightweight precision builds.

The optic keeps the same integrated base found on other compact Vudu models. That base supports aftermarket mini-ACOG mount patterns. Users can swap mounts without special adapters.

Designed for Versatile Rifle Setups

EOTech positions the 4-12×36 as a do-it-all optic. It stretches past typical LPVO magnification but avoids the size of larger precision scopes. The short body helps with balance on smaller rifles.

Looking through an optic with an illuminated reticle.
The illuminated reticle on the 4-12 Vudu is adjustable and lasts 300 hours on the middle setting.

The optic works well for shooters who want more reach than a 1-6x or 1-8x. It still stays usable up close when paired with an offset red dot. EOTech offers that setup directly from the factory.

An available CQB package includes the EFLX red dot. Shooters can mount it on top of the scope tube or at a 45-degree offset. That setup supports fast transitions without adding much weight or bulk.

Features and Specifications

  • Magnification: 4-12x
  • Objective lens: 36mm
  • Reticle: First focal plane MR5 or MD5
  • Weight: 16.9 ounces
  • Length: 7.1 inches
  • Turrets: Capped
  • Illumination: 10 brightness settings via rotary dial
  • Battery: CR2032, approx. 300 hours at setting 5
  • Construction: Aircraft-grade aluminum
  • Mount interface: Integrated base for mini-ACOG mounts
  • Zeroing: Easy zero-reset after sight-in
  • Packages: Scope-only or CQB package with 3 MOA EFLX and ring mount
Looking at the objective lens of the optic, there is a red dot-sight mounted above the scope at a 45 degree offset.
The 4-12 Vudu can also be purchased as a package deal with the EFLX red dot and ring mount. Here is one way to set it up.

Availability and Pricing

EOTech plans to ship the 4-12×36 Vudu in Q1, with availability expected around April to be more specific. Buyers can order through local dealers or online retailers.

View of the riflescope from the left, rear side looking down. This is a black rifle scope mounted on a tan AR style rifle.
On the left side of the optic, you can see the reticle brightness adjustments. There is no parallax adjustment.

MSRP runs about $1,219 for the optic alone. The CQB package with the EFLX red dot lists for roughly $1,589.

The 4-12×36 Vudu doesn’t replace an LPVO or a full-size precision scope. It fills the gap between them. For shooters who want reach, compact size, and a first focal plane reticle, this optic brings a practical new option

Learn more about the Eotech 4-12×36 Vudu HERE.

*** Buy and Sell on GunsAmerica! ***

Available on GunsAmerica Now

https://gunsamerica.com/listings/search

Leave a Reply

Your email address will not be published. Required fields are marked *