It wasn’t until the 1920s that telescopic instruments used as aiming devices began to be widely accepted in the United States, but since then scopes have become the primary means of aiming rifles. In fact, they have become so popular and there are so many choices, it is difficult to decide which to buy.
GA Guides
Show First
Raising the Bar with the Vortex Razor Gen III 1-10x
Published: March 29, 2020 { 5 comments }When the situation calls for shooting the same gun up close or hundreds of yards out, the Vortex Razor Gen III 1-10x has the features to allow top performance at either end of the spectrum. The 10 power gives that little extra to make things possible at greater distances.
An 80% 1911 Frame You Can Build in Your Garage
Published: February 28, 2020 { 12 comments }The Phantom Jig really makes it possible for the “garage builder” or “kitchen table gunsmith” to build a 1911. You need a drill press, a sturdy vise, and some elbow grease.
My Ideal Long-Range Setup: A Christmas List
Published: December 8, 2019 { 17 comments }If I were just getting into long-range, precision rifle shooting with the knowledge that I currently have, I know that I would have a lot less extra gear floating around the house.
5000 Yards! Vortex FURY HD 5000 Laser Rangefinder: Seeing Is Believing
Published: November 9, 2019 { 2 comments }The Vortex Fury HD 5000 is a compact unit that offers a crisp, clear view for spotting and evaluating game or targets and a powerful, fast rangefinder to determine a precise range to those targets. Two fantastic tools in one small package.
NIGHTFORCE NX8 1-8- Full Review
Published: October 4, 2019 { 6 comments }The little 1-8x is a scope that really can get the job done.
Bullets Matter in Handgun Accuracy – RMR’s 9mm 124 JHP MPR (.3555”)
Published: July 6, 2019 { 13 comments }With great ammo, you can turn a $400 handgun into one that shoots as well as a gun that costs many thousands. The opposite is true as well. Sometimes cheap ammo can turn a handgun that cost many thousands of dollars into one that shoots about as well as a cheap one.
Dillon 550 Conversion Kit – Walking Through the Setup
Published: June 15, 2019 { 3 comments }Getting a new reloading press is a pretty exciting thing! And there is so much to do – from finding the right work area and getting the machine assembled, to deciding what caliber(s) you want to start making. If you are new to handloading then there is also the overwhelming nature of the complexity of the task and the volumes of information to sift through. We’ve all been there!
Leupold VX-5HD 4-20×52 Review
Published: June 12, 2019 { 2 comments }The Leupold VX-5HD 4-20×52 tracked with 99.8 percent accuracy in elevation and 99.2 percent in windage on our tall target test. It has a 34mm tube, a locking ZL2 elevation turret with zero stop, side focus and a throw lever, and weighs 23.3 ounces. Leupold now also sells a VX-5HD Gen 2 4-20×52. Specs and [...]
Maximize Your Accuracy with the RCBS Competition Die Set
Published: April 19, 2019 { 3 comments }Scroll through any forum for ammunition reloaders, and you’ll often see the same advice for newbies: start small. Don’t buy an expensive die set until you know how to use a basic set from Lee or Hornady. This is good advice, generally speaking, but if you buy basic now and then decide to upgrade later, your final bill will be even higher. That’s why I was drawn to the Competition die set from RCBS.









