Gunsmithing

Let me be clear, this is NOT about a pepper spray that you might carry for protection against bears. Bear Spray, is the name my gunsmith decided to use for this project.

Some time ago, I wrote an article about completing a black powder revolver kit from Dixie Gun Works. Upon completion, the frame still needed to be refinished as it was just bare steel. I mentioned that I hadn’t yet decided on what finish to use on the frame, but wanted something that at least looked like color case hardening, as this is the finish the original Colts had

In a previous article, I discussed dealing with one common malady of these old shotguns, excess headspace. In this article, I’m going to cover another common issue: chamber length.

There are a whole lot of break-action shotguns out there. If you don’t have one, you probably know someone who does. A lot of these shotguns are old and in need of some kind of repair. And given the state of things at present, you may even be looking at using one as a home defense weapon. But with some work, you can put these shotguns into condition to fill even that critical role.

For your next barrel replacement, upgrade to an old rifle, or new gun build, don’t hesitate to contact Preferred Barrel Blanks and make them your preferred supplier.

Over the years, I have garnered a new found appreciation for the RP9 and the legacy of Remington handguns it represents. So this week when I found out about the promotion “Buy an RP9, get a case of Remington Brand 9mm”, I was glad to be able to set the record straight.

Not an uncommon sight: stripped out scope mount screw holes. They’re also our starting point for today’s project.

I set out to build the Ultimate 3 Gun Rifle, and I did. But I also accidentally built a rifle capable of PRS competition and hitting targets past 1000 yards.

Part 3 of the Ultimate 3 Gun Rifle