GA Guides

Crimping gets a bad rap. Just as we sometimes tend to fix construction mistakes with a hammer rather than taking the time to properly fit parts, we tend to view crimping as a way to “fix” a less than perfect bullet seating. The problem with crimping is that it sounds so logical. The word “crimping” kind of implies the process of locking a bullet in place. But, there is more to it than just that.

This article is about special safes for special needs. We’ll discuss how to customize your safe to your specific requirements. Also covered are various safe accessories to help you upgrade an enhance your current safe.

After rigorous testing, the United States Special Operations Command (USSOCOM or SOCOM) has selected the M-LOK modular rail system for future weapon systems.

So, let’s discuss the topic of seating and crimping in the reloading process. Stated simply, the seating step simply means jamming a new bullet into a cleaned, resized, primed, and powder-charged cartridge case. Crimping “generally” refers to the act of bringing the neck of the cartridge case back to proper dimension after that bullet is stuffed in. There’s a lot more to both actions, especially if you want to be safe, so let’s take a closer look at both steps.

Bullets are bullets, right? Well, not really. There are a wide array of variables in bullet shape, weight, materials, and construction. Each of these variables can have a dramatic impact on the performance, and safety, of any given load. In other words, loading recipe data for one 147-grain, .308 bullet may be incorrect, and even unsafe, for another projectile of equal caliber and weight. Let’s take a closer look at some of the variables and what you need to know about each.

For my money, the only two parts of the gun that actually matter are the barrel and the trigger. (Optics, I consider to be a completely different discussion.) The barrel is the only part that really actually matters for accuracy, and the trigger is the most important part for how you interface with that barrel.

Let’s face it: Even when they’re in a safe, your valuables face plenty of threats. And you can’t always be there to defend against those threats. Many of us spend a considerable amount of time away from home, which is one of the reasons why we have gun safes in the first place. As I have said in my previous articles in this series, gun safes buy you time against threats such as unauthorized access, theft and fire; they do not prevent threats entirely.

Tactical firearms and accessory manufacturer Hera Arms is working on a new set of FN P90-inspired stocks and grips for AR-15 rifles and SBRs.

This week, on adventures in amateur gunsmithing, we acquired a basic M4 Carbine-style AR kit for a DIY AR build project. The kit comes with a complete upper receiver and a lower parts kit. All you need to supply is a lower receiver.So, come with us on this DIY journey on home building our own AR!