“This is the finest close quarters combat handgun ever designed.” Said my friend and fellow firearms instructor Ken Hackathorn holding up a 1911 .45 Pistol in front of a class he was teaching at RangeMaster back in the late 1990s. I could not have agreed more. Ken may have changed his mind since then, I do not know, but I haven’t changed mine.

According to 1911 authority William Goddard, the first lot of 1911s (other than test pistols and tool room samples) were assembled at the Colt plant on 28 December 1911 (barely making it into the year the pistol was christened). They were shipped the first week of January. The rest, as they say is history. The collecting of 1911s is a joy and a field all to itself. But after 100 years, the 1911 still soldiers on, and not for nothing.

My focus is on use of the 1911, not collecting, but I am a student of history and the history of the 1911 in use for what it was intended is one of sublime success. My intent here is to touch on that use as well as some personal shooting impressions. I intend to spend a good bit of time on the “real” 1911. That is to say, U.S. Military issue and Commercial Government Models made before 1924 when the transition was begun to the 1911a1. To be sure the 1911a1 has very few fleas on it, but it is a slightly different pistol in my estimation.

My first personal experience with a 1911 was not exactly an auspicious occasion. My father was an excellent shot, worked for the Army for most of his adult life and was a WW-II veteran. Like many former military men he had an abiding respect for the .45 Automatic. And so, other than an old double barreled shotgun that had belonged to his father, the only firearm that he owned was an ex military 1911 for which I believe he paid the munificent sum of $15.

At the age of five, I had my first encounter with this pistol. It did not bode well. My dad had to help me hold the gun up but I was the one to press….ah jerk…on the trigger. Ear plugs? Real men did not use earplugs in the early 1950s! So their little boys didn’t either. Eye protection you ask? Nobody thought about it.

When I touched that pistol off I thought the world had come to an end! There was noise, and recoil and I probably would have dropped the blamed thing if my Dad’s hands hadn’t been wrapped around mine. To add injury to insult the hot empty case dropped right down the neck of my shirt and stayed there!

My next one 10 years later, didn’t do anything to improve my assessment. My first centerfire handgun was not a 1911, it was a 1911a1. I saved up money from soft drink bottle deposits and at age 15 bought a surplus Remington Rand .45. I did not buy it because I wanted a .45 Automatic. I bought it because I wanted a center fire handgun and it was cheap. By accident of birth and circumstances I was able to purchase this gun legally, though the owner of the pawn shop insisted that my Mother vouch for me. Just two years later I could not even purchase ammo as the 1968 Gun Control Act started taking effect.

Read More…

LaserMax Guide Rod Lasers https://www.lasermax.com/ by Thoughtful Reader Let’s just get something out of the way. I’m not a “gun guy”. I don’t frequent forums and discuss the finer points of this firearm or that, nor am I concerned with the incessant caliber debates. To me, the gun I carry is just a tool, like [...]

This is an explanation of how a transaction evolves and is reported in the GunsAmerica 6.1 interface using Classified Ads. The main change is that “Ask Seller a Question” and “Buy It” are now combined in My Classifieds so that you may seamlessly contact a buyer or report a sale from either one.
The images below are clickable to see a bigger one. We are using a smaller image to make the page more navigable. There are examples below of all of the admin screens in My Classifieds, and samples of the emails that go to both buyer and seller on a “Buy It” or “Ask Seller a Question.”

Read More…

OK, so if you’re here, you probably own a firearm of your own, or you may be looking for one. Owning a firearm, such as a pistol, is a lot of fun but it’s also a lot of responsibility. One of those responsibilities is the proper care and maintenance of your gun. If you want it to last, taking proper care of it is the key.

Be it rifle, shotgun, or handgun, each has it’s own particular characteristics. Here, we’ll talk about caring for handguns, both revolvers and pistols. Revolvers will generally need less in the way of maintenance, but will still need your TLC from time to time. Take a few minutes to pull that wheelgun out, look it over, and wipe it down if need be. In a similar situation, stainless guns will need less maintenance, but they can and will still rust if not properly cared for.

First off, there is a difference between maintenance and cleaning. One is done to keep the gun ready on an ongoing basis, and preserve it long term (maintenance). The other is cleaning he weapon after use. Both are important, but both hold slightly different roles in the care of your firearm.

Before we get into the specifics about caring for the guns, let’s pause here just briefly to go over where you do your work on them. Select a place that’s clear of clutter, and with a flat surface. Avoid places that have carpet or rugs as they will suck up and eat small pieces.

Most importantly, make sure the gun is empty, and if you need to, remove any and all ammunition from the room. I cannot emphasize this enough. Far too many people have been hurt or injured by someone cleaning an “unloaded” gun. Before you even start doing anything to a weapon you bring into your cleaning area, clear it, check it two or three times, then recheck it. Once you know it’s empty, and visually as well as physically check the chamber, you can begin. This goes back to the standard principle that you should treat every gun as loaded until you check it for yourself. When you sit down to clean or work on your gun, make sure you check to make sure it is empty first.

Read More…

Value means getting more than you paid for, and that’s exactly what you get with Vanguard’s Endeavor ED binoculars. For binoculars with the performance and features they offer, you would typically pay 50% to 500% more.

The MRSP on the Vanguard Endeavor ED 1045 is $499, but I found them on Optics Planet for $399 and on Amazon for $379. Until November 30th there is also a special running from Vanguard that you can get a shooting stick or other accessories free when you buy a pair of these great binocs. The direct link to the promotion is: https://www.vanguardworld.com/index.php/en/os/component/content/article/6-other/137-free-shooting-stick-with-binoculars-purchase.html

The Endeavor provides 10.5 x magnification with 45 mm objective lenses. Typical sport binoculars in this power range have 42 mm lenses. The larger 45 mm objective lenses gather more light with an inconsequential trade-off in weight and size. Compared to the Vanguard ED 10 x 42 binoculars, the 10.5 x 45 add a little more than an ounce in weight and 2 mm (less than eight hundredths of an inch) in width. The added brightness is well worth the minimal weight penalty.

To get the best image quality, binoculars have to basically do two things well: transmit as much light as possible, and focus the image clearly. Glass lenses reflect some of the light from their front surfaces and the inside of their back surfaces, anyplace that glass and air touch. That’s the flash you see if you happen to be in front of someone using binoculars or a telescope. Anti-reflection (AR) lens coatings assist in light transmission and also reduce ghosting and flare. Binoculars designated as AR “Coated” have a single layer of coating on at least some of the lens surfaces. This helps but multiple layers are much more effective. You’ll know if they have multiple layers if they say “Multi Coated.” “Fully Coated” means that all glass to air surfaces are coated, and the very best binoculars have “Fully Multi Coated” lenses, like the Vanguard Endeavor.

The second problem area for light transmission is the prisms. Quality binoculars generally use one of two types of prisms: poro prisms or roof prisms. You can tell if a pair of binoculars uses poro prisms because the objective lenses are wider than the eyepieces; the prisms are mounted side-by-side inside the binoculars.

Roof prisms are mounted in-line, making the binoculars sleeker and more compact, however roof prisms require better coatings and more precise manufacturing than poro prisms, which is why roof prism binoculars typically cost more. The Vanguard Endeavor uses a combination of roof prisms, BaK4 prism glass (which is superior to BaK7 glass used in cheaper binoculars), and special phase coatings, for optimum performance.

Of course, the quality of the lenses is responsible for the quality of the image, and the Endeavor uses ED or extra low dispersion glass which makes the very best lenses. Binoculars with ED lenses actually use a pair of objective lenses, or a lens couplet, in each tube to reduce chromatic dispersion. Chromatic dispersion stems from the fact that the different colors or wavelengths of light which make up white light (think rainbow), focus at slightly different points, creating a slightly fuzzy image. The second lens in the ED couplet corrects the dispersion created by the first lens, resulting in a sharp, clear image with fine detail resolution. That’s important if you’re trying to count the points on a deer at 300 yards or to see anything in low light conditions.

The Endeavor utilizes a magnesium alloy body for lightness and strength, rubber cladding to ensure a secure grip, and is nitrogen purged to eliminate fogging and protect the internals from oxidation. They also incorporate O ring seals to make them waterproof. That doesn’t mean you can take them to 90 feet on your next diving trip. They are guaranteed waterproof to 3.3 feet, which is more than enough to keep the rain out and provide a little insurance in case you drop them in the water at your duck blind.

Read More…

I can pretty much promise you that you will not see another review of the Auto Ordnance “Thompson” TA-5 Pistol that suggests you buy one to use as your main tactical carbine, but that is the way I see this gun. If you want an effective close quarters combat carbine in a pistol caliber that hits harder than 9mm, I have not encountered a cleaner and more effective candidate than this in the sub-$2,000 category. At an MSRP of $1,377 and street price substantially less, the TA-5 is a lean, mean fighting machine that eats everything you put through it and shoots into a ragged hole at 25 yards. What else do you need?
Read More…

Pellet guns let you to bring your shooting home and AirForce, a small manufacturing company in Fort Worth, Texas, makes some great guns to do it with. We tested their two most popular models, the Talon SS and the Condor, out at the ranch on a typical north Texas summer day.
There are basically three types of air guns: spring guns which must be cocked prior to each shot, CO2 guns which use small canisters of carbon dioxide as propellant, and pre-charged pneumatic (PCP) guns which use compressed air. The advantages of a PCP gun over the other two types are that they can be more powerful, they shoot more consistently, there is virtually no recoil, and follow-up shots are faster and easier since the gun doesn’t have to be cocked between shots. Read More…

See a need, fill a need. That’s the foundation of American ingenuity. While browsing through new ads coming onto GunsAmerica a couple of weeks ago, I happened upon a nifty homemade tool for adjusting the rear sight on a pistol. We’ve all gotten guns that came from the factory not shooting to point of aim, and while it isn’t an expensive gunsmith visit, it’s still a gunsmith visit. I’d rather have a tool I can bring to the range and adjust it myself, and also have to help others who I see dealing with the same issue. Read More…

Well, we’ve all seen the commotion about Glock’s new “Gen 4” version of their line of pistols. Some like it, some, well let’s just say aren’t jumping for joy. That shouldn’t be a surprise. Whenever a tried and true model gets an update, everyone wants to know how you improve on something that already works pretty well as is.

If you have an earlier model, we need to ask ourselves, “In today’s economy, is this really worth putting my hard earned money into?”

Read More…