Recoil System for CZ 75 P07 DUTY VERSION 1 & 2 – DPM

Description

Recoil System for CZ 75 P07 Duty – The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod in CZ 75 P07 Duty pistols. It maintains the pistol’s original configuration and ensures easy installation without modifying the firearm’s design or operation.

The system features a multi-spring recoil rod with three springs that work together to reduce recoil. One internal spring controls the slide’s movement, preventing it from slamming into the frame. The system includes one spring plug and two external springs. The external springs vary in length, with the long spring being heavier and the short spring lighter. This allows shooters to fine-tune the recoil system for optimal performance based on their preferences.

Important Notes:

• Spring Plug Installation: The spring plug is only required for Version 2 of the P-07 model.

• Identifying Your P-07 Version: Insert the DPM guide rod from the front side of the slide. If it stops at the first flange, your model is Version 1, and the spring plug is not needed. If the guide rod passes through to the end, you have Version 2, and the spring plug is mandatory.

• The DPM system may change over time with different springs, plugs, or washers, without prior notice.

Recoil System for CZ 75 P07 Duty – Characteristics:

• Compatibility: Recoil System for CZ 75 P07 DUTY VERSION 1 & 2

• Faster Follow-up Shots: The recoil reduction allows for quicker target acquisition and follow-up shots, especially for competitive shooters.

• Improved Firing Speed: The smooth slide operation reduces delays between shots, enabling faster firing.

• Slide and Frame Protection: The system prevents excessive slide impact, reducing wear and increasing the pistol’s lifespan.

• Minimized Jams: The recoil control reduces the risk of jams, ensuring reliable performance.

• Significant Recoil Reduction: The system provides better control and a more comfortable shooting experience by reducing recoil.

• Better Double-Tap Concentration: The recoil reduction aids in better control during rapid fire, including double-tap drills.

• Increased Accuracy: Fine-tuning the recoil system improves shot control, leading to better accuracy.

• Slide on the Battery (Idle Position):

  • Short Spring: 10lbs

  • Long Spring: 11lbs

• Full Slide Open Position: Approximately 24lbs of total force

With the DPM Mechanical Recoil Reduction System, you’ll enjoy superior recoil management, faster follow-up shots, and enhanced accuracy while protecting your pistol.