Description:
NUMBER 014 OUT OF A LIMITED EDITION 125 UNITS.
Each UDE Edition 5.56 PredatOBR rifle has UDE expertly applied to the exterior surfaces on the Upper Receiver, Lower Receiver, Handguard and both sides of the Dust Cover. A UDE LaRue A-PEG Pistol Grip and RAT Stock is factory installed. Along the handgaurd, Black LaRue GAP covers are installed, but the rifle also comes with additional UDE GAP covers and UDE IndexClips.
The PredatOBR 5.56 was designed for those who are searching for a hybrid cross between the standard OBR and PredatAR 5.56x45 Rifles. The most remarkable feature of the PredatOBR is its ability to be completely “broken down” and stored into the optional Rollup Bag and Toolbox. The PredatOBR handguard has a locking stainless steel QD Lever system on each side. Once the levers are released, the handguard slides off of the upper assembly in seconds. The PredatOBR's barrel can easily be removed with the supplied PredatOBR Barrel Wrench, unscrew the Barrel Nut from Receiver and pull the Barrel Assembly free from Receiver. No need to remove the gas tube, gas block or muzzle device. Reverse the process to reinstall. Hand-tighten Barrel Nut and torque approximately 1/8-turn past hand-tight (Approximately 40-50 foot pounds). Once reassembled correctly, the point of impact (POI) shift will be 0.0 to 0.5 MOA of the original.
PredatOBR barrels are chambered in 5.56x45mm, 1/8" twist rate. All muzzles are threaded in 1/2 x 28. Like the OBR and PredatAR riles, LaRue has eliminated the conventional AR barrel nut and bolt the handguard directly to the proprietary upper receiver, creating a true “free-float” barrel. The handguard does not touch the barrel or barrel nut at any place. The zero-MOA upper rail provides plenty of room for weapon-mounted night-vision day/night combinations. Both the upper and lower are CNC-machined from billet aluminum for the optimum fit and consistency.
The PredatOBR has threaded stainless-steel hard-points over the entire length of the handguard at the 3, 6, and 9 o’clock positions. These hard-points have an integral spine built-in for structural support. Provided with the system are three 3-inch MIL-STD-1913 rail sections that can be positioned anywhere along the handguard, per operator preference. These rail sections are attachable/detachable using a supplied tool (Torx® T-15 wrench). The rail sections are CNC-machined from billet aluminum. This robust solution provides a perfect precision mounting space for aiming lasers, illumination and bipods.
The PredatOBR's Port Selector Technology™ (PST) gas block is adjustable, to aid in the optimum function when using a sound suppressor. This special gas block contains a dual port mechanism that is operated by rotating a lever from one side to another. When the lever is rotated to the right-side of the rifle, the gasses are reduced, to compensate for the extra blowback created by the suppressor. When rotated to the left side, the gasses are increased for use without a suppressor.
The LaRue Tactical 6-position Retract Action Trigger (R.A.T.) Stock comes standard with every PredatOBR. It is ergonomic, has protected control surfaces and contains a set of cleaning rods in an internal compartment. Since the height of the 12 o’clock rail is at the optimum position, there is no need for a cheek riser as part of this system. The New A-PEG grip also comes standard. This grip was designed to be ambidextrous and places the hand in the corrected position for precision shooting.
The LaRue Muzzle-Brake Adapter was designed for the new LaRue TranQuiloTM line of silencers. It is precision-machined from 17-4 PH Stainless Steel. The Adapter’s patented dual-shouldered design seats the TranQuiloTM suppressor in perfect alignment to the bore, eliminating gas from escaping to the rear of the suppressor…keeping threads clean and free of carbon.
Specifications:
Caliber: 5.56 x 45 mm NATO
Rifling Twist Rate: 1/8
Barrel Life: 10,000
Condition:
New In Box
Brand:
LaRue Tactical UDE Edition 5.56 PredatOBR 16"
Model:
LT-15
Caliber:
.223 Remington (5.56 NATO)
Item #:
947184841
Stock No.:
LTS7605
Location:
IA
Trades Accepted:
Shipping Notes: SHIPPED PRIORITY MAIL 2 DAY or UPS or Fedex. Shipping Costs $100.00
This will ship in its original plastic case and then packaged in a secure box.
