Description:
Based on my research, this is actually a full HK/G3 Kit. The bolt group alone sells for nearly $400.00
I set my reserve WELL below that mark.
***My HK was chambered in .308 This barrel appears to also be .308 caliber size. It's a bit dusty, but looks to be surplus/new. I took a couple photos of the inside, as best I could. I could be wrong, but, the way the light reflects & by the brilliant mirror-like shine, inside the barrel, I THINK it may very well be chrome lined. I CAN NOT BE 100% SURE ABOUT THAT, THOUGH! Hopefully, you H&K folks will know for certain!
Here is a list of the parts. There are a few other (Mostly small)parts I didn't list. What you see in the photos is exactly what you'll get. Obviously, some of the listed parts are assembled.
1.FLASH HIDER
2.BARREL
3.ROTARY REAR SITE
4.BACK PLATE
5.BUFFER
6.BUTT PLATE
7.BUTT STOCK
8.PISTOL GRIP
9.TRIGGER HOUSING/TRIGGER GROUP
10.HAND GUARD
11.COCKING LEVER
12.COCKING LEVER SUPPORT
13.COCKING LEVER ELBOW SPRING
14.RECOIL SPRING/ROD/GUIDE RING
15.WASHER/SCREWS
16.FRONT SIGHT/RING TOWER/EYE BOLT
17.***BOLT GROUP***
18.SCOPE MOUNT
***The barrel, has the following written/marked on it; FMP-UZ2 5/71 L88
***THE BOLT GROUP LOOKS like it's a mix of new & surplus components, all in excellent condition. THE BOLT HEAD HAS SOME BLACKISH LOOKING STAINS, FOR LACK OF A BETTER DEFINITION. TOTALLY COSMETIC, NOT A FUNCTIONAL ISSUE. It will polish right up, if someone wanted to take the time to do so. It's dirty from laying around, even though it was in a plastic bag, it's got grease on it & collected dust, etc.
A quick cleaning & new grease/oil and it will be ready for action. THE BOLT CARRIER IS MARKED FMP 12/66 AND THE BOLT HEAD IS MARKED HK 11/63.
THE FOLLOWING PARTS ARE ALREADY ASSEMBLED IN THE BOLT GROUP, AND ARE AS FOLLOWS;
FMP BOLT CARRIER
HK BOLT HEAD
LOCKING ROLLERS
FIRING PIN
FIRING PIN SPRING
BOLT HEAD LOCKING LEVER & COMPRESSION SPRING
EXTRACTOR SPRING
EXTRACTOR
CYLINDRICAL PIN
LOCKING PIECE CLAMPING SLEEVE
The BARREL MEASURES EIGHTEEN (18) INCHES LONG, WITHOUT THE ADDITION OF THE FLASH HIDER. THE BARREL MEASURES NINETEEN & ONE QUARTER (19--1/4)INCHES LONG WITH THE FLASH HIDER (Already installed)
This parts "kit" came with the HK91 I used to own. I purchased my HK through a consignment type deal from a gun shop, and never met the actual owner. I really didn't give any thought about these parts. I was only interested in the 91, but, seem to recall being told that the owner was in the process of building another HK/G3 rifle, hence, this kit. Many of the parts appear to be surplus/new? A few of the parts appear used.
The HAND GUARD, BUTT STOCK look well used (SEE PHOTOS) The butt stock has 7/71 FMP on it next to the sling pin.
I'm no expert, I don't build/assemble my own guns, like a lot of folks do. I did my best to list the parts correctly. I compared these parts to kits I found online, and it appears to contain the same type/brand parts as most of those kits. I took a LOT of photos. Again, there are some parts not listed here, either loose, or, in some of the assembled components. Please feel free to contact me with any questions/comments/info! THANKS FOR LOOKING!
Condition:
Used - See Item Description
Caliber:
(Other Ammo?)
Location:
SC
Trades Accepted:
Shipping Notes: I will ship via USPS OR UPS, once payment clears. PAYMENT CAN BE MADE VIA USPS MONEY ORDER, PAYPAL OR CASH IN PERSON. CONTACT ME FOR MORE DETAILS.
