This listing is for ONE Breech Bolt. Any combination of 3 or more non-gun non ammo items ship free, lower 48. From an Importer liquidation come these breech bolts for an Akkar made Charles Daly model 300 Pump Action shotgun chambered in 12 gauge for 3 1/2 inch shells. Manufacturer was Akkar Silah Sanayi Ltd. of Istanbul, Republic of Turkey. Importer was Samco Global Arms, Inc. / SGAI of Miami, the Charles Daly Importer from 2012 until 2015. Production dates ranged from 2007 until 2014. Construction is entirely milled steel with a matte blue oxide finish. This is the earlier variant with relief cut on its rearward left side of the bolt; it will still fit both older model and late model 300 Akkar and Daly shotguns that will accept 3 inch shells. Bolt dimensions are 3.031 inches long; 0.844 inch wide; and 0.863 height. Schematic number is View 51 in the manual. No other parts are included. These bolts will only fit an Akkar model 300, or an Akkar / Charles Daly model 300 Pump Action shotgun chambered in 12 gauge, that will chamber 3 inch shells. They will not fit in any other shotgun that we know of. Note that they are stripped, bolt only; and do NOT contain any firing pin, extractor, springs or any other parts. Replacement pricing on this part runs upwards of $70 on GPI. We're offering the Akkar Daly milled steel Breech Bolt in the photos, however, each for only $ 29.00.