![\"A](\"https:\/\/www.gunsamerica.com\/blog\/wp-content\/uploads\/2017\/08\/Centruy-Arms-N-PAP-21-of-33.jpg\" "\\"A")
<\/a>The Yugoslavian military adopted the basic pattern of the Soviet AKM rifle and made some alterations to adapt it to their doctrine. Rifle grenades were thought of as a huge force multiplier by the Yugoslavians, which resulted in several of those modifications. The rifle was equipped with a gas shut off, its trunnion was made wider, and its receiver was fashioned from 1.5 mm. sheet metal rather than 1 mm. This configuration allowed the Yugoslavian AK to fire a steady diet of rifle grenades without coming apart. The Soviets had experimented with under-folding stocks but had quickly abandoned them for a variety of side-folding stocks. The Yugoslavian military, however, adopted the under-folding stocks and issued many them.![\"A](\"https:\/\/www.gunsamerica.com\/blog\/wp-content\/uploads\/2017\/08\/Centruy-Arms-N-PAP-9-of-33.jpg\" "\\"A")
<\/a>\nCentury Arms N-PAP DF<\/h2>\n
Century Arms has struck a deal with Zastava in Croatia (formerly Yugoslavia) to produce the N-PAP DF<\/a> rifle for them. This is a traditionally-styled Yugoslavian AK variant featuring the under-folding stock, blonde wood and excellent quality. I was thoroughly impressed with the fit and finish of my example rifle. The blued finish on all the metal parts was very nicely done, the gun did not rattle, and every single part was fit tightly, to the point of needing to be loosened up by working them back and forth prior to my first range trip.<\/p>\n The ATF has kindly set up a list of parts that must be American-made for a firearm to be imported. The net output of these restrictions is often just a plethora of sub-standard rifles since many parts are imported and assembled in the United States, rather than the parts being produced and assembled by a single entity. To avoid this quality pitfall, the major components of this rifle are all produced in Croatia, assembled, and then shipped to the United States with the rifle in a non-functioning state. Century then installs the internal fire control systems, slant-cut muzzle brake, and plastic pistol grip, and then adds a Magpul magazine. This process to allows the gun to be completely legal while benefiting from excellent manufacturing processes in Croatia, and an outstanding fire control system not found easily on other rifles. Century has developed their own fire control system, and I found it to be simply outstanding. When I measured the trigger pull with my Wheeler Engineering digital gauge, it delivered 2.2 pounds on the foot of the trigger and 5 pounds at the top. It broke cleanly and consistently with a short reset. The under-folder was of a traditional Yugoslavian design, constructed of riveted, folded steel that came to a horseshoe-shaped with a push button on the left side of the receiver that allowed it to be under-folded, swiveling around the Magpul magazine. The butt plate on the end pivoted without any buttons to push. I will note that this mechanism required a lot of work to be loosened up before it was serviceable in the field; I\u2019m not complaining, as I\u2019ve seen many of them that will simply flop back and forth.<\/p>\n Another uniquely Yugoslavian feature is the button to remove the top dustcover that is found on the left upper-rear of the receiver. To remove the cover, you simply push the button and then push the guide rod forward. From what I can tell, this is a feature left over from grenade-firing that prevented the dust cover from coming loose during grenade launching.<\/p>\n The front hand guards are both made of wood. As to what type of wood, there\u2019s plenty of speculation on the internet, but nothing definitive. I will note that they were very tight and functional, and presented no issues. However, I believe that I would replace these with a polymer set that would offer some modularity to the front of the gun. Another feature on this gun is a bolt hold open that has been integrated into the safety selector, allowing for the bolt to be locked to the rear. To engage this, you pull the bolt to the rear while applying upward pressure on the selector lever. The bolt then slips into a notch cut on the selector, locking it open. This can be particularly helpful, as some ranges require locking the bolt back on your gun to transport it or to show clear when going downrange to change targets. There are Yugoslavian magazines available that have a special follower that will hold the bolt open rather than allowing the bolt to close after the last round has been fired. I ran my example gun with a few such magazines and it worked flawlessly.<\/p>\n I find myself scratching my head when I hear a gun person say, \u201cI would never buy that gun because it doesn\u2019t have\u2026\u201d A common one I hear the desire for a chrome-lined barrel. \u201cWhy?\u201d instead. The answer is usually something like \u201cWell, that\u2019s what the government guns have!\u201d<\/p>\n I will then offer up that most people agree that chrome-lined barrels sacrifice accuracy and that nitride-treated barrels offered today are considered more accurate and reliable. Sometimes, I will follow that up by suggesting that the practice of chrome-lining the barrel is obsolete anyway, as we have better viable coatings. Chroming the barrel and bolt also allows corrosive ammunition to be used until it was exhausted, so why sacrifice accuracy now in the name of tradition? This usually results in a lot of scuffing of feet in the gravel, and then the subject gets changed. I have brought this up because there are a few such features \u201cmissing\u201d from this rifle, that for 99.9 percent of the users would never be of any value anyway. The gas shut off, widened trunnion and thicker sheet-metal on the receiver have not been added to this rifle. The only function that they served was to launch rifle grenades; why would I need that? I\u2019ve never launched a rifle grenade with an AK. However, if you regularly find yourself in situations where you are launching rifle grenades with an AK 47, you probably shouldn\u2019t buy this gun. As a matter of fact, the addition of these features would only serve to add unnecessary weight to the gun, without providing any necessary or improved functionality.<\/p>\n The barrel on the N\u2013PAP is hammer-forged but unlined. This could be an issue if you\u2019re planning on shooting corrosive ammunition. A quick note on corrosive ammunition: The corrosive part of the round is not the powder or projectile, but rather the primer. Cleaning a gun fired with corrosive ammunition is as simple as washing it with hot soapy water and then rinsing it off. Failure to do this can result in corrosion of the barrel, bolt, and chamber. Most ammunition available to us in the United States today is non-corrosive, so this shouldn\u2019t be a deal-breaker. The bolt and bolt carrier are nickel-plated rather than the traditional chrome-plating. This should not present an issue, as the nickel is easy to clean and will resist carbon well. My final admonition here is that the Yugoslavian rifles use some non-standard parts from traditional AKM rifles. The handguards, buttstock, dustcover and gas tube are all unique, so they will not be a simple swap with AKM variance. That being said, aftermarket parts are not difficult to find, as there are plenty of companies manufacturing parts for these Serbian rifles.<\/p>\n In summation: don\u2019t buy corrosive ammunition, clean the dang rifle every once in a while, and try to avoid active military conflict zones because you don\u2019t have a grenade launcher on your AK.<\/p>\n Article Continues Below\u00a0<\/strong><\/p>\n I ran into my first learning curve while loading the 75-round drum; this thing has a manual of arms that, if taken lightly, could probably remove a fingertip. Once I nearly discovered this the \u201ccutty amputate-y\u201d way, I busted out the instruction manual. After about 20 minutes of reading and working, I had 75 rounds of Red Army ammunition locked and loaded. The other two varieties of magazines were straightforward and easy to load.<\/p>\n As I was shooting the gun, I was immediately impressed by how easy it was to control with the Century Arms trigger. I must confess that the under-folding stock was a bit irritating. I traditionally will shoot with electronic earmuffs, and I quickly discovered that the metal arm of the under-folder likes to work itself under the earmuffs and then proceed to push them off my ear. This necessitated swapping out the earmuffs for earplugs. Also, the stock required me to lean more into the gun than normal to see the sights correctly.<\/p>\n While reloading after the third magazine, I noticed that the cleaning rod tended to walk itself loose and begin to charge the target on its own. I solved this problem by simply removing the cleaning rod and putting it in my range bag. After a few hundred rounds, I was sure that the gun was running consistently, so I decided to heat it up a bit by running the 75-round drum. Two things became evident. First, about half way through the drum, the gun began to smoke from the barrel and gas tube. The wood forearm did an excellent job of keeping the heat from becoming uncomfortable on my hands. The only real issue was that the smoke sometimes made it a little difficult to acquire the front sight. At about 50 rounds, my finger had decided that this was above its pay grade and began to grow fatigued. When the drum was finally exhausted, there was a small cloud of smoke around the front of the gun, which was admittedly pretty cool. To perform the accuracy testing, I used the Caldwell lead sled and a steel 8-inch target at 100 yards. I put a fresh coat of white paint on the target and settled in behind the gun. No matter which ammunition that was run, and with a variety of shooters behind the trigger, this gun delivered 3 \u00bd inch groups with decided consistency. I found these results to be quite acceptable for a gun of this class.<\/p>\n There was the obligatory shooting of the gun with the stock folded. The resulting demonstration was one of what I refer to as \u201cturning money into noise,\u201d or maybe just a waste of ammunition. The gun is not actually designed to be fired with the stock folded. This was not a productive activity. Nevertheless, it was fun and necessary. If you\u2019re going to be launching rifle grenades and shooting corrosive ammunition, don\u2019t buy this gun. However, if you\u2019re looking for a Yugoslavian under-folder that is well-made, with a great trigger for a reasonable price this should be on your shopping list.<\/p>\n For more information about Centuy Arms, click here<\/a>.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nWhat’s Relevant?<\/h2>\n
<\/a><\/p>\n<\/a><\/p>\nSPECS<\/h2>\n
<\/a>\nTest Firing<\/h1>\n
<\/a>I loaded up three different types of magazines. In addition to the included Magpul magazine, I ran some Yugoslavian steel and a Romanian 75-round drum. To fill these magazines, I had a quantity of Red Army steel case, American Eagle brass case, and Hornaday steel case ammunition.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\nThe Bottom Line<\/h1>\n