{"id":190757,"date":"2023-06-25T15:36:12","date_gmt":"2023-06-25T19:36:12","guid":{"rendered":"https:\/\/www.gunsamerica.com\/digest\/?p=180787"},"modified":"2023-06-25T15:36:12","modified_gmt":"2023-10-03T02:33:14","slug":"3d-printed-suppressor-reviewed-huxwrx-flow-7-62-ti","status":"publish","type":"post","link":"https:\/\/gunsamerica.com\/digest\/3d-printed-suppressor-reviewed-huxwrx-flow-7-62-ti\/","title":{"rendered":"3D Printed Suppressor Reviewed: HuxWrx Flow 7.62 Ti"},"content":{"rendered":"\n

<\/path><\/svg><\/span><\/span>Estimated reading time: <\/span>5<\/span> minutes<\/span><\/p>\n\n\n\n

\"Flow
Even though the Flow 762 Ti is 30 caliber, you can still use it on every popular rifle chambering because it comes with no barrel length or caliber restrictions; provided that the projectile is 30 caliber or smaller. <\/figcaption><\/figure>\n\n\n\n

I’ve had the Flow 762 Ti for months now, even before it was released publicly. During this time, I put several hundred rounds through this suppressor with the most punishing platform that I have; an FN SCAR 15P chambered in 5.56x45mm NATO with a 7.5-inch barrel. The pressure and heat that the Flow 762 Ti sees on this platform are on the extreme end. Still, even with the suppressor glowing red-hot and the handguard too hot to touch, the flow 762 Ti never failed or caused any degradation in performance. To this day, there is still no visual wear that I can detect on the blast baffle or muzzle device.<\/p>\n\n\n\n

About<\/h2>\n\n\n\n

The HuxWrx Flow 762 Ti<\/a> is a 30-caliber suppressor on the cutting edge of technology. This space-age can is 3D printed using durable and light grade 5 titanium. This manufacturing process allows HuxWrx to make very complex pathways within the suppressor to guide the gas flow most efficiently for slowing and cooling the gasses while still venting forward. This venting action limits backpressure within the firearm’s gas system. Because these hot gasses are not retained within the suppressor, the Flow stays cooler than most systems during high-rate firing strings. In fact, this suppressor is full-auto-rated and has no caliber or barrel length restrictions. HuxWrx ran the flow through a SOCOM Reliability Stress Test where it passed with flying colors.<\/p>\n\n\n\n

\"HuxWrx
The Flow 762 Ti is the perfect suppressor for an SBR like this one because it is short, light, and robust. <\/figcaption><\/figure>\n\n\n\n

The Flow requires the use of one of three HuxWrx muzzle devices that utilize their Torque Lock System; the Flash Hider-QD, Flash Hider-QD AK, or Muzzle Brake-QD. These muzzle devices add around 3-3.7 ounces of weight to the muzzle and are made of Heat Treated 17-4 Stainless Steel. The Torque Lock System is toolless and ensures that the Flow is indexed identically when removed and reinstalled. The tapered surface on the QD muzzle devices blocks any potential carbon buildup from the threads, making the suppressor easy to remove and install time after time. <\/p>\n\n\n\n

Video<\/h2>\n\n\n\n

Check out this video review of the Flow 762 Ti, shooting it on 3 different calibers\/platforms. <\/p>\n\n\n\n

\n