{"id":18945,"date":"2014-05-01T18:08:55","date_gmt":"2014-05-01T22:08:55","guid":{"rendered":"http:\/\/www.gunsamerica.com\/blog\/?p=18945"},"modified":"2014-05-01T18:08:55","modified_gmt":"2023-08-17T13:04:24","slug":"century-international-arms-c39-sporter-rifle-ammo-shortage-low-ammo-prices-low-gun-prices-100-american-made","status":"publish","type":"post","link":"https:\/\/gunsamerica.com\/digest\/century-international-arms-c39-sporter-rifle-ammo-shortage-low-ammo-prices-low-gun-prices-100-american-made\/","title":{"rendered":"Century International Arms C39 Classic Rifle\u2014No ammo shortage, low ammo prices, low gun prices, 100% American made"},"content":{"rendered":"
\"The<\/a>

The Century International Arms C39\u00a0Classic rifle is an AK-47 made entirely in the US.<\/p><\/div>\n

By Wayne Lincourt
\nhttps:\/\/www.centuryarms.com\/<\/a><\/p>\n

https:\/\/www.leupold.com\/<\/a><\/p>\n

https:\/\/www.texasweaponsystems.com\/<\/a><\/p>\n

https:\/\/www.damageindustriesllc.com\/<\/a><\/p>\n

If you like to shoot like I do, you\u2019re faced with limited supplies of ammo and high costs (when you can find it). You can\u2019t always reload either, because the most common powders are just not available. I\u2019ve been looking for reloading powder online and at the local sporting goods stores for more than a month. Got everything else, but no powder to send the bullet on its way.<\/p>\n

However, there is one rifle cartridge that\u2019s in plentiful supply at very reasonable prices\u20147.62×39. Developed by the Soviets during WW II, it later became the cartridge of the battle rifle developed by Makhail Timofeyevich Kalashnikov. Introduced as the Avtomat Kalashnikova model 1947, better known as AK-47, the gun was adopted by the Soviet Armed Forces in 1949 and has since proven itself in 65 years of continuous service in militaries around the world.<\/p>\n

\"You<\/a>

You can see the gas tube, which actuates the bolt carrier group, on top of the C39 just forward of the hand guard.<\/p><\/div>\n

The popularity of the low-cost 7.62×39 round has not escaped the attention of AR-15 manufacturers, and there are now a number of really nice ARs chambered in 7.62×39. The problem is that to buy one you have to pay AR prices (unless you build your own). Century Arms, long an importer of surplus foreign-made AKs, has developed its own brand new AK-47, the C39 Classic, made in its Vermont factory and sold for less than half the price of an AR. As an aside, this is not intended as an argument in favor of the AK platform versus the AR. The AR is a newer, more refined and versatile design. This is strictly about the practical economics of shooting on a budget in today\u2019s firearms\/ammunition environment.<\/p>\n

Up to this point, you were limited to military surplus AK-47s. The problem is in finding one that\u2019s not, to use the scientific term, junk! Some perform reasonably well, some don\u2019t function well at all, and accuracy is quite literally, hit or miss. AKs went from milled receivers to stamped receivers in 1963 to reduce manufacturing costs, and that\u2019s what you\u2019ll find in most imported guns. These military surplus (used) guns can be found for around $400 depending on model and condition. Of course, government restrictions on importing certain guns, like the AK-47, led to American-made parts to make them legal. You see, you can still sell them as long as they are made with no more than ten imported parts (Title 18 Chapter 44 Section 922(r) of the United States Code). That\u2019s where the term \u201c922r compliant\u201d comes from. These restrictions resulted in additional parts being produced in the US until we had almost enough to build an entire gun. Century International closed the loop a couple years ago and started manufacturing completely new US-made AK-47s dubbed the C39 Rifle. The receivers of the Century International Arms guns are machined from solid steel for better accuracy and repeatability. The rest of the parts are pretty standard AK parts.<\/p>\n

\"The<\/a>

The big lever above the trigger is the clunky AK-47 safety. It was very tight at first, but the more it\u2019s used, the easier it gets to manipulate. The lever sticking down between the trigger guard and the magazine is the clunky AK-47 mag release.<\/p><\/div>\n

The Century International C39 Classic Rifle is faithful to the Kalashnikov design, which has proven to be rugged, dependable and easy to maintain. The AK is a simple design wherein a gas port on top of the barrel actuates a piston which in turn cycles the action. The fact that the gas drives a rod to cycle the bolt carrier group means that the top end of the rifle stays cleaner than a direct impingement systems, where the gasses act directly on the bolt. All parts are readily accessible simply by removing the dust cover and extracting the recoil spring\/gas rod and bolt carrier assembly. The handguard\/gas tube assembly is easily removed by first turning a small lever that releases the pressure holding it in place. Another lever allows removal of the forend.<\/p>\n

That\u2019s as far as you have to go to strip the gun unless you want to replace the stock. The stock is a little more difficult to remove due to the press fit, but it\u2019s not that bad with the right tools. The C39, by-the-way, uses a Polish-style stock attachment that secures the stock with a lower tang as well as an upper tang extending back from the receiver. This is a more solid attachment but limits aftermarket stock selections. There are two departures from the original AK. The rear leaf sight is adjustable for both windage and elevation instead of just elevation, and the stock is one inch longer than military issue. They are both good changes.<\/p>\n

As you can see in the photos, Century has installed nice laminated wood furniture that retains the classic look of the AK while providing greater stability than solid wood. The wood is available in three colors \u2013 black, brown or blonde. The test gun obviously has the brown wood. It\u2019s also available with composite furniture for a slightly higher price, and there\u2019s a chrome-lined barrel option as well.<\/p>\n

\"The<\/a>

The flash suppressor\/muzzle brake is a Century exclusive. It\u2019s held in place by a spring-loaded button on the front of the sight base. I added a stainless steel wave lock washer to hold it more rigidly. That will be replaced with a set of thin washers that will allow tightening the muzzle brake completely.<\/p><\/div>\n

The only concern I had before going to the range was that the flash suppressor\/muzzle brake had some free movement. It screws down almost tight and is held in position, with the ports directed up to reduce muzzle rise, by a spring loaded plunger. However, because it wasn\u2019t seated firmly, the suppressor could be wiggled a little with your fingers. I solved the problem with a stainless steel wave lock washer from Ace Hardware, which I placed between the suppressor and the front sight mount to take up the slack. It probably wasn\u2019t necessary, but I figured it couldn\u2019t hurt.<\/p>\n

On my first range session, I found that the C39 is a fun gun to shoot. Magazines are easy to load simply by pushing the rounds straight down from the top of the mag, and recoil is moderate, meaning that after 220 rounds I could have kept shooting. It doesn\u2019t beat you up the way that some rifles do. By-the-way, the C39 comes with two 30-round Tapco USA composite magazines in the familiar and somewhat sinister banana shape. Although the gun may look bad with the 30-round mag, I found the Tapco 5-round and 10-round magazines to be more practical for range work. For hunting most game, the 10-round mag would provide plenty of firepower as well. The 30-rounders would be fun to burn through ammo with a Slide Fire bump stock, but commercial ranges limit fire to no more than one round per second. Bummer.<\/p>\n

Using the stock iron sights, the gun was reasonably accurate. At 50 yards, I shot some one-inch three-shot groups, although my five-shot groups always opened to three inches or so. At 100 yards, my five-shot groups averaged around six inches, which is good for me using iron sights.<\/p>\n

I wanted to mount an optic, though, to get a better idea of the gun\u2019s real accuracy potential. One of the inherent problems with the AK, unfortunately, is mounting an optic. The loosely mounted dust cover on the top of the receiver doesn\u2019t offer a suitably stable surface to attach a scope. Some AK versions have provisions to add a mount to the left side of the receiver. The side mount arches over the dust cover, detracting from the clean lines of the gun, and has to be high enough to permit opening the dust cover, just barely. This puts the optic higher than optimum for achieving a good cheek weld on the stock.<\/p>\n

\"Damage<\/a>

Damage Industries makes some nice accessories for the AK-47, including this forend\/handguard\/gas tube. It also makes parts to accessorize the accessories, like the sling swivel and handguards that snap onto the rails.<\/p><\/div>\n

There are several solutions available in the aftermarket. Some require drilling holes in the receiver, a process I wanted to avoid. Damage Industries has a nice forend\/handguard\/gas tube replacement made from anodized aluminum. It\u2019s well made and provides a host of mounting options including long and short Picatinny rails, sling swivels and rail covers in all the popular colors. It was a very tight fit. Unfortunately, as much as I liked the forend\/handguard, I had problems with the red dot mount, which extends back from the side of the forend. It\u2019s actually an extended Picatinny rail that makes a couple of 90-degree bends to bring it on top of the dust cover behind the leaf rear sight. This leaves the optic mounted on an extended (7 \u00bd\u201d unsupported) length of aluminum that has some flexibility. There\u2019s a screw which supports it at the rear by resting on the dustcover. However, I just couldn\u2019t keep the sight zeroed and finally gave up on it.<\/p>\n

There are rails that mount directly to the dust cover, but the stock cover just isn\u2019t stable enough to work. I then came across a variation on this from a company in Austin, Texas, not too far from me\u2014Texas Weapons Systems (TWS). It is called a Dogleg Rail, but it\u2019s really a replacement dustcover with the rail built in. The \u201cdogleg\u201d portion of the name comes from a component that replaces the leaf sight, being pinned solidly to the top of the receiver. This is held under considerable pressure from the leaf sight flat spring. It then bolts directly to the TWS dustcover, anchoring it securely at the front. Also included is a replacement dust cover retaining button. The bottom of this button is cut with a bevel or wedge shape that puts downward pressure on the back of the dustcover. Through mechanical advantage, it effectively triples the force of the recoil spring as it converts it to clamping force to hold the dustcover solidly in position. There are some further modifications to the bottom skirt of the dustcover for added stability. The TMS mount is a full-length rail permitting the use of a scope instead of simply a red dot, or if you wanted a red dot, you could also add a magnifier behind it.<\/p>\n

\"The<\/a>

The Texas Weapon Systems\u2019 rail proved to be a solid scope mount for getting the most from this surprisingly accurate gun.<\/p><\/div>\n

I mounted a Leupold VX-R HOG 1.25-4×20 variable power illuminated reticle scope. The reticle is one Leupold calls the FireDot Pig Plex. You don\u2019t really need the illuminated center red dot, but it does make target acquisition faster in a hunting situation where you want to get a shot off quickly. The combination of the Texas Weapons Systems Dogleg and the Leupold VX-R was just what I was looking for. After zeroing at 50 yards, I went to the 100-yard target and was able to quickly fine-tune the zero. Amazingly, the Century C39 shot to 1 minute-of-angle accuracy. That\u2019s all shots into one inch at 100 yards with cheap Russian made ammo! Given the AK\u2019s reputation for poor accuracy, it was much better than I expected and certainly plenty of accuracy for hunting or home defense.<\/p>\n

I used some of the most readily available ammo from Wolf and Silver Bear. More specifically, 123 grain jacketed hollow point Wolf ammunition from Ukraine, and two types of Silver Bear from Russia \u2013 123 grain jacketed hollow point and 123 grain semi-jacketed lead soft point. (These are all steel cased rounds so you can\u2019t reload them.) The Silver Bear hollow points consistently performed the best. They also had the highest muzzle velocity and the least deviation in velocity from round to round. The Wolf hollow points were the second best for accuracy, although they had the lowest muzzle velocity. Out of a total of 350 rounds of a mix of ammo, there was only one malfunction\u2014a failure to extract with the Wolf ammo. The Silver Bear soft points had the second highest average muzzle velocity but the greatest deviation in velocity shot-to-shot and the poorest accuracy.<\/p>\n

\"The<\/a>

The Leupold 1.25-4x20mm VX-R HOG illuminated scope was the perfect match for the capabilities of the C39. Doesn\u2019t look too bad on it either.<\/p><\/div>\n

MSRP for the C39 is $799.99. Street prices seem to be running around $600-640. The ammunition cost less than twenty-five cents a round buying in bulk\u2014240-500 round lots.<\/p>\n

As I said, it\u2019s a fun gun to shoot, doesn\u2019t break the bank, and I like the look of wood on a gun. If you want to make it your own, there are lots of aftermarket products to customize it. The only problem I\u2019ve run into is finding a fully adjustable folding stock. Most aftermarket stocks are designed for stamped receivers, and I haven\u2019t yet learned if it\u2019s possible to modify one to work with the C39.<\/p>\n

The Leupold VX-R HOG is a good match. Because the leaf sight base is higher than the top of the dust cover, you\u2019d have to use high rings if your scope had much of a bell on the objective end. It\u2019s best to have scopes mounted as close to the bore axis as is practical. Mounted on a one-piece Leupold forward cant set of rings, it clamped easily to the Picatinny rail. I took it off during my range session to check the screws of the TWS rail and it went back to zero when I reinstalled it. As in any scope mount, you should use blue Loctite on all the screws. Same with the TWS rail. There were no problems with screws shooting loose on either.<\/p>\n

The illumination button is on the left side of the scope. One press turns it on and each additional press takes it to the next brightness level. Hold it in and the dot turns off. The next time you turn it on, it illuminates at the last setting. The optics are bright and clear, edge-to-edge. The 4-power max magnification was plenty for 100 yards and should allow you to place accurate shots out much farther. I especially liked that you didn\u2019t need a screwdriver to adjust windage and elevation. Eye relief for me was about 3 \u00bd\u201d, which gave me a full field of view through the scope with everything in sharp focus. The only thing I\u2019d add to the scope would be a good set of flip-up lens caps to protect the glass. The 1.25 setting is good for close in or moving targets. In fact, with the dot illuminated, you could use any magnification setting with both eyes open. Where you see the dot is where you\u2019re aiming. Just ignore the magnified image.<\/p>\n

Although you could potentially take game out to 300 yards, I\u2019d personally use the AK for shots out to 200 yards. The Leupold should be all the scope you\u2019d need for that. MSRP is $624.99. As usual, street prices are considerably less. I\u2019ve seen it advertised for around $500.<\/p>\n

Century C39 Ballistics:\u00a0<\/strong><\/p>\n

Ammunition\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0 Mean Velocity\u00a0\u00a0\u00a0\u00a0 Standard Deviation\u00a0\u00a0 Extreme Spread\u00a0\u00a0\u00a0\u00a0 Muzzle Energy\u00a0\u00a0 Smallest Group Size<\/span>*<\/p>\n

Silver Bear 123gr JHP\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0 \u00a0\u00a0\u00a02461.6 fps\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a07.36 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 38 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0 \u00a0\u00a0\u00a01655 ft. lbs.\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0.75\u201d<\/p>\n

Silver Bear 123gr SP\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 2446.8 fps\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a012.96 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 86 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a01635 ft. lbs.\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0 2.80\u201d<\/p>\n

Wolf 123gr JHP\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0 2321.2 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0 8.32 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 41 fps\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a01471 ft. lbs.\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1.58\u201d<\/p>\n

*Five shot groups fired from a rest at 100 yards.<\/p>\n\n\t\t