{"id":162730,"date":"2022-10-02T12:19:51","date_gmt":"2022-10-02T16:19:51","guid":{"rendered":"https:\/\/www.gunsamerica.com\/digest\/?p=162730"},"modified":"2022-10-02T12:19:51","modified_gmt":"2023-09-08T05:31:42","slug":"fitting-and-finishing-a-wood-rifle-stock","status":"publish","type":"post","link":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/","title":{"rendered":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester"},"content":{"rendered":"\n
\"Fitting<\/figure>\n\n\n\n

Recently, I had a rather interesting project come my way from GunsAmerica\u2019s own True Pearce. Mr. Pearce had an original Winchester 1895 rifle, chambered in 30-40 Krag that needed a new stock fitted to it. Fitting a wood stock would seem to be something of an \u201cold school\u201d gunsmithing task in today\u2019s world of synthetic stocks, drop-in parts, and buffer tube-mounted collapsible stocks. But it is surprisingly relevant to the hobby gunsmith of today. There are all sorts of projects a hobby gunsmith might wish to take on that involve fitting or finishing wood furniture. This article is meant to be an overview of the process of fitting and finishing that stock, not necessarily provide step-by-step instructions (as this would be space prohibitive). My objective is to show the hobby gunsmith that it\u2019s within their capability to take on a project like this. At any rate, the original stock was broken out at the side of the top tang and Mr. Pearce wanted a new replacement fitted.<\/p>\n\n\n\n

Most inletted replacement wood stocks are left with some fitting required. This is done to allow them to be properly fitted to the rifle. Some of this is just practicality, as older rifles like the subject of this article, had considerable variation in their dimensions, by today\u2019s standards at least. So leaving the stock oversized allows enough \u201cmeat\u201d on them to ensure a proper fit and good appearance. And obviously, a finish needs to be applied to the bare wood as well to protect the wood and for aesthetics. The stock used in this project came from Here<\/a><\/p>\n\n\n\n

\"Fitting
Here you can see the idea behind the inletting blue. It marks the locations that need work. Use it SPARINGLY!!<\/figcaption><\/figure>\n\n\n\n

There actually aren\u2019t all that many tools required to fit a stock. I used this<\/a><\/code> for inletting black. I used an Exacto knife for some of the internal work. I used a palm-handled gouge for the radius at the back of the tang. I used a palm-handled skew chisel for other portions. I also used a carving knife for some of the detailed material removals. I purchased these specialty woodworking tools from the carving tool section of the Woodcraft store in Franklin, TN but they\u2019re available online here<\/a>. Files are used for internal work, in addition to external shaping. I used this<\/a> oil finish. Lastly, I used sandpaper of different grits for finish prep.<\/p>\n\n\n\n

The first thing I needed to do was to do the internal fitting to allow the stock to slide into place. This is something of a delicate process. You don\u2019t want to remove too much material or it will look awful at best, or at worst the improper fit will cause the stock to break prematurely. So go slow and don\u2019t be in a hurry. Don\u2019t use too much force trying to install it, push too hard and you\u2019ll break the stock.<\/p>\n\n\n\n

\"Fitting
Here I used a pillar file to work on the tang. You can see the \u201csafe\u201d side of the file, which is important here as it allows me to file on the side of the tang without removing any wood from the bottom of the slot.<\/figcaption><\/figure>\n\n\n\n

 First, apply the inletting blue on the internal features of the rifle that the stock needs to fit. This will leave some on the places of the stock that are interfering, which will show where material needs to be removed. Use it sparingly, as it\u2019s a pain to clean up and it spreads like anti-seize grease. The \u201cdirty\u201d appearance of the stock in the pictures is proof of this. At any rate, the inletting blue will transfer some onto the areas that are interfering with the stock, giving you a visual indication of where you need to work.<\/p>\n\n\n\n

\"Fitting
Getting close!<\/figcaption><\/figure>\n\n\n\n

There are a lot of internal features that have to be fitted with this model of Winchester. Some wood-stocked rifles are considerably simpler in this regard. So I couldn\u2019t just focus on one area, rather I had to work around all of the internal features a little at a time. I used all of the cutting tools and files I mentioned earlier at different points of this internal work. You keep working at the high spots all around until the stock slides in like it should and you have even contact all the way around. Go slow and take just a little at a time. It\u2019s a lot easier to take wood off than it is to put it back again! Lastly, I removed the inletting blue from the rifle and the stock.<\/p>\n\n\n\n

\"Fitting
Drilling the tang screw hole.<\/figcaption><\/figure>\n\n\n\n

With the internal fitting complete, I needed to drill the hole for the tang screw. This was pretty straightforward. I marked the hole, and then put the stock in the milling machine to drill the hole. I did this before I started with the external work. So if I managed to put a mark on the stock in the process, I\u2019d remove it in the process of external shaping and finish prep.<\/p>\n\n\n\n

\"Fitting
Here I\u2019m using a carving knife to work on the recess for the point on the buttplate.<\/figcaption><\/figure>\n\n\n\n

Along with the internal work, some external fitting and shaping were required as well. The stock needed to be cut for the buttplate. It is my understanding that Winchester 1895s had a few different types of buttplates during their production. And so the new stock was left without cutouts for the buttplate and I would have to add them. The buttplate on this rifle is rounded on top and comes to a point. After marking out where the point needed to be, I started carving it out with the palm chisel. Then I finished it up with the carving knife. The buttplate for this rifle is not flat, being curved towards the \u201cinside\u201d, so I used a large half-round file to contour the back of the stock to match this radius. It didn\u2019t take a whole lot, but some work there was definitely necessary. With the stock fitted for the buttplate, I drilled the holes for the buttplate screws. Pay particular attention to the screw size, and their orientation when drilling these holes. Sometimes these screws don\u2019t just go straight in from the back. Once the screw holes were drilled, I finished shaping the outside contour to match the buttplate.<\/p>\n\n\n\n

\"Fitting
A sanding block makes it easier to sand the round profile of the stock.<\/figcaption><\/figure>\n\n\n\n

With the fitting and shaping done, it was time to prepare the surface for the finish. This process is a bit tedious. I started with coarse 80 grit sandpaper. I used a sanding block to ensure I didn\u2019t round off any edges and to make the process easier. I sanded away the surface defects using this coarse paper. Now to be clear, for this particular project I didn\u2019t remove all of them. The handguard on this rifle is original with 130 years of usage, wear, and light damage. A completely brand new stock lacking any blemishes would look a bit odd. So, I didn\u2019t sand out all of the marks and defects. This sort of thing may be a consideration in your project as well. Anyway, I went to progressively finer grit sandpaper until I finished with the 320 grit sandpaper that the instructions had called for.<\/p>\n\n\n\n

\"Fitting
This is the oil finish used in this project.<\/figcaption><\/figure>\n\n\n\n
\"Fitting
Wet Sanding removes a lot less material than dry sanding. The stock is starting to look nice at this point.<\/figcaption><\/figure>\n\n\n\n

Mr. Pearce had asked for a specific finish that was supposed to recreate the original finish Winchester applied to them. This oil finish is mixed with mineral spirits to thin it. Then I used a wet sanding technique using this mixed oil. I put oil on 320 grit sandpaper and sanded the stock. The \u201cwet sanding\u201d significantly reduces the material removed by sanding. This also creates a type of paste that is then spread into the pores of the wood to fill them, which smoothes out the surface of the wood. I wiped the stock across the grain, to leave some in the grain. Then I left the stock to dry for a few days. I applied three coats and then I switched to 400 grit paper and repeated the process. Then it\u2019s time for final finishing.<\/p>\n\n\n\n

\"Fitting
You take just a dab of oil on your finger, and rub it over the stock. Less is more here.<\/figcaption><\/figure>\n\n\n\n

This particular finish calls for \u201chand-rubbed\u201d final finishing. While I didn\u2019t find it to be terribly labor-intensive, it is rather time-consuming. I applied just a little dab of the oil mixture and rubbed it in with my hand. Don\u2019t use too much or you\u2019ll end up with a sticky mess.  I rubbed it until it started to feel a little warm, just like the instructions called for. Then after I had rubbed oil on all of the stock in this manner, I wiped off the excess with a rag and let it dry for 2-3 days. You may need to adjust this time based on your environmental conditions at the time. I repeated this process about 10 times. So it\u2019s a few minutes of work, and then it has to sit for a few days. But by this point, it was looking pretty good. Then it was time to put everything back together.<\/p>\n\n\n\n

\"Fitting
Here is the rifle with the newly finished stock installed. Looks pretty good if I do say so myself.<\/figcaption><\/figure>\n\n\n\n

Fitting and finishing a wood stock is a worthwhile skill set for a hobby gunsmith to have. After all, anything with a stock could need a replacement at some point in its life. Or you might just want to spruce up that broken old hunting rifle by replacing the wood furniture. Maybe you prefer the look and feel of a wood stock over a synthetic stock. In any case, fitting and finishing a wood stock is a very rewarding project. Until next time, Happy \u2018Smithing!<\/p>\n\n\n\n

***Buy and Sell on GunsAmerica!<\/a>***<\/h2>\n","protected":false},"excerpt":{"rendered":"

Recently, I had a rather interesting project come my way from GunsAmerica\u2019s own True Pearce. Mr. Pearce had an original Winchester 1895 rifle, chambered in 30-40 Krag that needed a new stock fitted to it. Fitting a wood stock would seem to be something of an \u201cold school\u201d gunsmithing task in today\u2019s world of synthetic stocks, drop-in parts, and buffer tube-mounted collapsible stocks. But it is surprisingly relevant to the hobby gunsmith of today. <\/p>\n","protected":false},"author":80,"featured_media":162741,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_specdata_upc":"","_specdata_placement":"","footnotes":""},"categories":[7,1052,72],"tags":[132,102,614,2590,1658,287],"featured":[],"hunt365":[],"class_list":{"0":"post-162730","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-gunsamerica-authors","8":"category-chris-mace","9":"category-columns-gunsmithing","10":"tag-buzz","11":"tag-feature-articles","12":"tag-gunsmithing","13":"tag-gunsmithing-instruction","14":"tag-riflestock","15":"tag-winchester"},"yoast_head":"\nFitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester<\/title>\n<meta name=\"description\" content=\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester - Chris Mace\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester\" \/>\n<meta property=\"og:description\" content=\"Recently, I had a rather interesting project come my way from GunsAmerica\u2019s own True Pearce. Mr. Pearce had an original Winchester 1895 rifle, chambered in 30-40 Krag that needed a new stock fitted to it. Fitting a wood stock would seem to be something of an \u201cold school\u201d gunsmithing task in today\u2019s world of synthetic stocks, drop-in parts, and buffer tube-mounted collapsible stocks. But it is surprisingly relevant to the hobby gunsmith of today.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/\" \/>\n<meta property=\"og:site_name\" content=\"Gun Reviews and News | GunsAmerica.com\/Digest\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/gunsamerica\" \/>\n<meta property=\"article:published_time\" content=\"2022-10-02T16:19:51+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-09-08T05:31:42+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"244\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Christopher Mace\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@gunsamerica\" \/>\n<meta name=\"twitter:site\" content=\"@gunsamerica\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Christopher Mace\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/\"},\"author\":{\"name\":\"Christopher Mace\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/person\\\/d947747eb541fa81bad26ba9ea635d9d\"},\"headline\":\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester\",\"datePublished\":\"2022-10-02T16:19:51+00:00\",\"dateModified\":\"2023-09-08T05:31:42+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/\"},\"wordCount\":1758,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Finished-Rifle.jpg\",\"keywords\":[\"Buzz\",\"Feature Articles\",\"Gunsmithing\",\"Gunsmithing Instruction\",\"Riflestock\",\"winchester\"],\"articleSection\":[\"Authors\",\"Chris Mace\",\"Gunsmithing\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/\",\"name\":\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Finished-Rifle.jpg\",\"datePublished\":\"2022-10-02T16:19:51+00:00\",\"dateModified\":\"2023-09-08T05:31:42+00:00\",\"description\":\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester - Chris Mace\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#primaryimage\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Finished-Rifle.jpg\",\"contentUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2022\\\/04\\\/Finished-Rifle.jpg\",\"width\":1200,\"height\":244,\"caption\":\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/fitting-and-finishing-a-wood-rifle-stock\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#website\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\",\"name\":\"Gun Reviews and News | GunsAmerica.com\\\/Digest\",\"description\":\"Gun Reviews, Industry News, and Product Reviews for Rifles, Pistols, Revolvers, Shotguns, Optics, and Ammunition. Looking to purchase a firearm online? Look no further than GunsAmerica.com, America's premier destination for buying and selling firearms.\",\"publisher\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\",\"name\":\"GunsAmerica\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/image-3.png\",\"contentUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/image-3.png\",\"width\":286,\"height\":156,\"caption\":\"GunsAmerica\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/gunsamerica\",\"https:\\\/\\\/x.com\\\/gunsamerica\",\"https:\\\/\\\/instagram.com\\\/gunsamerica_official\\\/\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/GunsAmerica\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/person\\\/d947747eb541fa81bad26ba9ea635d9d\",\"name\":\"Christopher Mace\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"caption\":\"Christopher Mace\"},\"description\":\"Christopher Mace enlisted in the US Army as an Infantryman in 2001. He served in the 82nd & 101st Airborne Divisions, with four deployments to Afghanistan & Iraq. Chris started hobby gunsmithing in 2005. After completing his service in 2010, he earned AAS degrees in Machining as well as Welding & Fabrication, and a Gunsmithing Technician Certificate from Trinidad State Junior College. Chris has taken several armorers courses on different firearms, and has built several different types of firearms. He has been collecting & shooting military firearms, old and new since he was 18. Chris enjoys repairing, customizing, building & assembling firearms, as well as different disciplines of competition shooting.\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/author\\\/christopher-mace\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester","description":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester - Chris Mace","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/","og_locale":"en_US","og_type":"article","og_title":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester","og_description":"Recently, I had a rather interesting project come my way from GunsAmerica\u2019s own True Pearce. Mr. Pearce had an original Winchester 1895 rifle, chambered in 30-40 Krag that needed a new stock fitted to it. Fitting a wood stock would seem to be something of an \u201cold school\u201d gunsmithing task in today\u2019s world of synthetic stocks, drop-in parts, and buffer tube-mounted collapsible stocks. But it is surprisingly relevant to the hobby gunsmith of today.","og_url":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/","og_site_name":"Gun Reviews and News | GunsAmerica.com\/Digest","article_publisher":"https:\/\/www.facebook.com\/gunsamerica","article_published_time":"2022-10-02T16:19:51+00:00","article_modified_time":"2023-09-08T05:31:42+00:00","og_image":[{"width":1200,"height":244,"url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg","type":"image\/jpeg"}],"author":"Christopher Mace","twitter_card":"summary_large_image","twitter_creator":"@gunsamerica","twitter_site":"@gunsamerica","twitter_misc":{"Written by":"Christopher Mace","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#article","isPartOf":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/"},"author":{"name":"Christopher Mace","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/person\/d947747eb541fa81bad26ba9ea635d9d"},"headline":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester","datePublished":"2022-10-02T16:19:51+00:00","dateModified":"2023-09-08T05:31:42+00:00","mainEntityOfPage":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/"},"wordCount":1758,"commentCount":1,"publisher":{"@id":"https:\/\/gunsamerica.com\/digest\/#organization"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#primaryimage"},"thumbnailUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg","keywords":["Buzz","Feature Articles","Gunsmithing","Gunsmithing Instruction","Riflestock","winchester"],"articleSection":["Authors","Chris Mace","Gunsmithing"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/","url":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/","name":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester","isPartOf":{"@id":"https:\/\/gunsamerica.com\/digest\/#website"},"primaryImageOfPage":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#primaryimage"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#primaryimage"},"thumbnailUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg","datePublished":"2022-10-02T16:19:51+00:00","dateModified":"2023-09-08T05:31:42+00:00","description":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester - Chris Mace","breadcrumb":{"@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#primaryimage","url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg","contentUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle.jpg","width":1200,"height":244,"caption":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester"},{"@type":"BreadcrumbList","@id":"https:\/\/gunsamerica.com\/digest\/fitting-and-finishing-a-wood-rifle-stock\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/gunsamerica.com\/digest\/"},{"@type":"ListItem","position":2,"name":"Fitting and Finishing a Wood Rifle Stock on an Original 1895 Winchester"}]},{"@type":"WebSite","@id":"https:\/\/gunsamerica.com\/digest\/#website","url":"https:\/\/gunsamerica.com\/digest\/","name":"Gun Reviews and News | GunsAmerica.com\/Digest","description":"Gun Reviews, Industry News, and Product Reviews for Rifles, Pistols, Revolvers, Shotguns, Optics, and Ammunition. Looking to purchase a firearm online? Look no further than GunsAmerica.com, America's premier destination for buying and selling firearms.","publisher":{"@id":"https:\/\/gunsamerica.com\/digest\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/gunsamerica.com\/digest\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/gunsamerica.com\/digest\/#organization","name":"GunsAmerica","url":"https:\/\/gunsamerica.com\/digest\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/logo\/image\/","url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2026\/01\/image-3.png","contentUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2026\/01\/image-3.png","width":286,"height":156,"caption":"GunsAmerica"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/gunsamerica","https:\/\/x.com\/gunsamerica","https:\/\/instagram.com\/gunsamerica_official\/","https:\/\/www.youtube.com\/user\/GunsAmerica"]},{"@type":"Person","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/person\/d947747eb541fa81bad26ba9ea635d9d","name":"Christopher Mace","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","caption":"Christopher Mace"},"description":"Christopher Mace enlisted in the US Army as an Infantryman in 2001. He served in the 82nd & 101st Airborne Divisions, with four deployments to Afghanistan & Iraq. Chris started hobby gunsmithing in 2005. After completing his service in 2010, he earned AAS degrees in Machining as well as Welding & Fabrication, and a Gunsmithing Technician Certificate from Trinidad State Junior College. Chris has taken several armorers courses on different firearms, and has built several different types of firearms. He has been collecting & shooting military firearms, old and new since he was 18. Chris enjoys repairing, customizing, building & assembling firearms, as well as different disciplines of competition shooting.","url":"https:\/\/gunsamerica.com\/digest\/author\/christopher-mace\/"}]}},"featured_image_src":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2022\/04\/Finished-Rifle-150x31.jpg","_links":{"self":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/162730","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/users\/80"}],"replies":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/comments?post=162730"}],"version-history":[{"count":8,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/162730\/revisions"}],"predecessor-version":[{"id":188975,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/162730\/revisions\/188975"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/media\/162741"}],"wp:attachment":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/media?parent=162730"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/categories?post=162730"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/tags?post=162730"},{"taxonomy":"featured","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/featured?post=162730"},{"taxonomy":"hunt365","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/hunt365?post=162730"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}