{"id":155840,"date":"2022-04-21T20:32:53","date_gmt":"2022-04-22T00:32:53","guid":{"rendered":"https:\/\/www.gunsamerica.com\/digest\/?p=155840"},"modified":"2022-04-21T20:32:53","modified_gmt":"2023-09-07T23:40:36","slug":"one-armed-boom-stick-the-robinson-armament-xcr-l-pistol","status":"publish","type":"post","link":"https:\/\/gunsamerica.com\/digest\/one-armed-boom-stick-the-robinson-armament-xcr-l-pistol\/","title":{"rendered":"One-Armed Boom Stick \u2013 The Robinson Armament XCR-L Pistol"},"content":{"rendered":"\n
\"One-Armed
The Robinson Armament XCR-L Pistol chambered for 7.62×39<\/figcaption><\/figure>\n\n\n\n

I\u2019m old enough to remember when there were pistols, and there were rifles, and you could tell the difference at a glance. But I\u2019ll admit, I\u2019m also old enough to remember rotary dial telephones and rabbit-ear antennas. But even most of the youngsters among us can remember the advent of the AR pistol form factor. Initially designed, I\u2019m convinced, as a way to thumb one\u2019s nose at the inherent lunacy of legal and regulatory restrictions and classifications \u2013 it took off as a legitimate and fairly lucrative operating space in the firearms market.<\/p>\n\n\n\n

I\u2019ll confess that I have personally struggled to fall in love with the \u201cAR Pistol\u201d form factor because I have found it generally difficult to wield as a pistol. All that weight out at the end of your arm can be hard to manage for more than a few seconds at a time, and most arm brace designs force the gun into a configuration where it is nearly impossible to see open sights properly. However, that struggle is over \u2013 and I have fallen in love with the pistol configuration available from Robinson Armament Co.<\/p>\n\n\n\n

\"One-Armed
The XCR-L is more than the sum of its parts – but what great parts they are!<\/figcaption><\/figure>\n\n\n\n

This review is based on the Model XCR-L chambered in 7.62×39, but other than a very few caliber-specific characteristics, it would apply universally to the XCR-L in general. Additionally, with the exception of the arm brace and the use of the word \u2018pistol\u2019, everything in this review would also relate directly to the Robinson XCR-L rifle platform.<\/p>\n\n\n\n

I didn\u2019t know much about Robinson Armament until just a few years ago, and it is likely that many folks know little or nothing about their products \u2013 so let\u2019s start there. The Robinson Arms design, XCR was an initial hopeful for government contracts and competed in the SCAR trials. Well, I say \u201ccompeted\u201d lightly \u2013 because it was essentially disqualified at the starting gate for what many (this author included) consider to be a very superficial reason. \u201cXCR\u201d is and abbreviation for eX<\/strong>changable C<\/strong>aliber R<\/strong>ifle \u2013 and the \u201c-L<\/strong>\u201d suffix is for \u201clight\u201d calibers. I would describe the gun as a hybrid of AR-15, AK-47, SCAR, and Innovation. It is the most ergonomic design I\u2019ve personally used.<\/p>\n\n\n\n

Exchangeable calibers for the XCR-L include: 5.56, .300 BLK, 7.62×39, 6.8 SPC, 6.5 GREN, .224 VALK, and it is available in several barrel lengths as a rifle and as seen here, as a pistol. Our copy of the gun is configured as a pistol, which includes the tailhook arm brace \u2013 the difference between a highly functioning rifle-caliber pistol and a clumsy oddity.<\/p>\n\n\n\n

HOW IT\u2019S MADE<\/strong><\/p>\n\n\n\n

The Robinson design successfully borrows the best elements of several different types of guns, and then adds its own innovative elements. The result is the most user-friendly gun of its kind that I have used. For starters, it is fully ambidextrous. All the operating controls function left or right side \u2013 with equal efficiency and feel. That is, except for the charging handle, which is on the left side of the gun. The handle is nicely covered in a round hard rubber material that makes it friendly to operate. It is non-reciprocating, so no danger to hand placement while shooting.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

My favorite control on the gun is the ambidextrous bolt catch\/release. It is located at the front end of the bottom of the trigger guard \u2013 with mirror controls on each side. A simple swipe down with the trigger finger releases the bolt home to chamber a round. Also as easy, just putting some upward pressure on the control while running the bolt back will engage the catch. This is about a thousand times easier than finding the tiny handle of a miniature ping-pong paddle.<\/p>\n\n\n\n

The magazine release and safety switches are both nicely located with good reach for the average finger or thumb \u2013 and completely intuitive to shooters.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

The arm brace controls are both simple and sophisticated. The brace is of high-quality materials and well finished. It is adjustable for length via a simple \u201csqueeze release\u201d located on either side of the unit, with a locking wheel just below, to keep it set in the sweet spot. And if you don\u2019t want to collapse it and have to find that sweet spot again but want to make it small for storage or transport \u2013 it folds. The spring-loaded folding hinge will take the brace a full 180 degrees and lock it in place. When deployed, it is a precision part with no perceivable wiggling or jiggling while shooting or handling. The tail hook portion of the brace deploys downward to the right with the push of a button to unlock it. To re-collapse it, simply snap it back into place and the latch engages automatically.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

The use of the tailhook is simple. You grip the pistol with your strong hand while allowing the lower \u201chook\u201d to fall under your forearm. When you extend the gun, the weight and leverage will bring the hook into contact with your arm and provide balance and stability. The gun as shown weighs in at 7 lbs., but it feels much lighter with the brace. Best of all, you do not have to try to contort your arm in an unnatural way as most strap-on braces demand, and you can easily acquire and maintain a perfect sight picture. For me, this takes the gun from novelty to practical.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

Perhaps most interesting about the design of the gun is the ease of field strip. The upper and lower receivers are attached in two points. Out front is a removable pin on which the parts can pivot for most cleaning and maintenance needs, or be removed for separation. The big difference is the one-button release of the upper receiver that does not require you to pop a pin through.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

Simply depress the takedown button fully forward (it is held in place via the recoil spring) and tilt the upper forward. You will then see that this button is a permanent attachment to the operating rod assembly. From that assembly, the bolt carrier is suspended and easily removed for maintenance. The bolt is a hefty 3-lug design and incorporates a fixed key that is a milled-in part. One less small part to deal with or lose.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

For simple cleaning, the bolt is easily stripped and re-assembled, with few parts to work with. The only small part is the keeper pin that retains the firing pin in the bolt. Full detail stripping requires a bit more disassembly \u2013 which I have not yet done.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

SHOOTING THE XCR-L<\/strong><\/p>\n\n\n\n

Two words: muzzle blast. But I mean that in the bestest, funnest, most \u2018Merica way! 7.62×39 ammunition is generally formulated for a minimum of 16 inches of barrel. Shorten it to nearly half that length, and then stick a triple-port muzzle break on for good measure, and you\u2019ve got yourself a boom stick! This gun makes sure that all your senses are awake and enjoying range day. Now, if that sounds ominous or negative in any way, it\u2019s not. The only real precaution I will share is to make sure you have extra-good earpro, because it is loud. I wear expensive custom-made in-the-ear protectors, and I thought I might like more. Between the volume, the concussion, and the muzzle flash \u2013 you can be sure that you\u2019ll be grinning from ear to ear \u2013 and drawing a crowd.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

I did all my shooting at 25 yards, at which distance the gun was accurate with even the cheap steel cased stuff, but loved the Herter\u2019s 122-grain load, that put a five-shot group in 5\/8\u201d and made the best three of those nearly impossible to measure. That was strictly open sights that had not even been adjusted, as can be seen by the location of the groups. I have little doubt of its capabilities out to 100 yards as being reliable, especially when paired with ammo it likes.<\/p>\n\n\n\n

\"One-Armed<\/figure>\n\n\n\n

Recoil is extremely manageable, and I found that shooter fatigue with this much weight on the extended arm was not much of a factor. Again, I credit the tailhook brace for providing a natural stance with excellent support. In the full course of testing, I had two rounds of TulAmmo with hard primers that had to be struck twice to light \u2013 but no other issues of any kind. Feeding and ejection are flawless, far better than other similarly chambered guns I\u2019ve tested.<\/p>\n\n\n\n

Above all, the XCR-L is just plain fun to shoot. And make no mistake, this is far from a range toy. The practical and tactical uses for this gun are immediately clear, and it is undoubtedly up to the task. I found that a two-hand grip (exactly as you would grip any pistol) was comfortable, offered excellent control, and helped avoid fatigue. This would make quite a formidable defensive weapon but is tame enough for about every authorized family member to effectively use.<\/p>\n\n\n\n

\n