{"id":119145,"date":"2020-02-28T18:48:00","date_gmt":"2020-02-28T23:48:00","guid":{"rendered":"https:\/\/www.gunsamerica.com\/digest\/?p=119145"},"modified":"2020-02-28T18:48:00","modified_gmt":"2023-09-06T07:49:36","slug":"80-percent-1911-frame-you-can-build-in-your-garage","status":"publish","type":"post","link":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/","title":{"rendered":"An 80% 1911 Frame You Can Build in Your Garage"},"content":{"rendered":"\n

I\u2019m sure most of you reading this have heard about the Polymer 80 Glock style pistol frames that are intended for home builders. These can be completed with no machine tools and only a few common hand tools. I\u2019m also sure that there\u2019s some of you who would like to build a pistol but aren\u2019t into polymer-framed, striker-fired pistols. Some of you are \u201cgarage builders\u201d and looking for something a little more challenging than an AR build. Some of you are just diehard 1911 fans. If any of this sounds familiar, this build is for you. <\/p>\n\n\n\n

Most 1911 builds from years past required some fairly complicated machining unless you were going to start with a completed frame (What fun is that?). Homebuilding took a big step forward with 80% frames becoming available. But these still required some machining, which is beyond what most folks have the capability to do in their garage. Enter the Stealth Arms Phantom Jig. <\/p>\n\n\n\n

\"An
The Phantom Jig kit\u2019s contents. <\/figcaption><\/figure>\n\n\n\n

To back up a step, completion of an 80% 1911 frame requires drilling the hammer and sear holes, cutting the frame rails, and cutting the barrel seat. The Stealth Arms Phantom Jig is designed to allow the home builder to complete one of these frames with things you probably already have. You need a drill press, a sturdy vise, and some elbow grease. The Phantom Jig really makes it possible for the \u201cgarage builder\u201d or \u201ckitchen table gunsmith\u201d to build a 1911. The Jig comes with all the drill bits needed. However, there are also a few special tools you may or may not need to assemble your frame once you\u2019ve completed it depending upon the particulars of your build. <\/p>\n\n\n\n

\"An
The 80% frame; our starting point. <\/figcaption><\/figure>\n\n\n\n

 To be clear, there are some limitations to this method of finishing a 1911 frame. The Phantom Jig is not really intended for use with steel frames. Stealth Arms reports having mixed results in completing steel frames with it. Some of you may have some reservations about an aluminum frame. However, aluminum-framed 1911s are not some new concept. Colt introduced the aluminum-framed Commander in 1949. So aluminum-framed 1911s have been with us for quite a while now. Aluminum is 1\/3 the weight of steel and doesn\u2019t rust as steel does. These are good attributes to have in a handgun frame.<\/p>\n\n\n\n

\"An
These cutters are the \u201cmagic\u201d of the Phantom Jig. They allow you to cut the barrel seat and frame rails without a milling machine. <\/figcaption><\/figure>\n\n\n\n

I bought the Phantom Jig and 80% frame at the Knob Creek Machine Gun Shoot from JSD Supply<\/a>. You can purchase the fixture directly from Stealth Arms<\/a> as well, and there are a number of sources for 80% Aluminum 1911 frames. I had a bunch of other 1911 parts already that I used for this build. I used a slide and barrel from an Argentine Colt-Systema, which is a 1911A1. The other parts were takeoffs or leftovers from previous 1911 projects. I decided to build a GI type 1911A1 because it\u2019s easier to assemble and less expensive. But you can build yours as simple or elaborate as you like. For those of you wanting a build similar to this one (but don\u2019t have a pile of 1911 parts lying around as I did), you might try one of the 1911 builder\u2019s kits from Sarco<\/a> as they are very reasonably priced. Or alternatively, Stealth Arms sells a variety of 1911 build kits and parts themselves. However, my main focus here is the actual completion of the 80% frame, rather than the finer points of assembly. These details will likely be different for you depending on the specifics of your particular build. Now, on to building!<\/p>\n\n\n\n

\"An
Here is the frame-mounted in the fixture, ready to drill the pinholes. <\/figcaption><\/figure>\n\n\n\n

The first operation is drilling the hammer and sear pinholes in your drill press. Do not try to drill the pinholes with a hand drill; you will trash your frame. Line up the jig until the drill bit goes straight into the corresponding sized holes without binding. Drill the holes one side at a time. Do not try to drill all the way through or the drill bit may walk and mess up your holes. Drill down until you feel the bit breakthrough inside the frame. Then flip it over and do the other side. This drilling operation will leave burrs on the inside of the frame, so after you\u2019ve drilled the holes use a file to remove them so everything will go together properly.<\/p>\n\n\n\n

\"An
Drilling the hammer and sear pin holes with the drill press. <\/figcaption><\/figure>\n\n\n\n
\"An
This is the \u201ccar\u201d portion of the fixture. It holds the cutters and the adjustment knob. <\/figcaption><\/figure>\n\n\n\n

The next operation is cutting the frame rails. The car comes partially assembled, so finish putting it together first. Make sure everything is tightened down properly, and that the barrel seat cutter is out of the way with its set screw tightened to hold it there. Put the spacer block in the side opposite the one you\u2019re cutting on to support the jig in your vise. You use the knob to advance the cutter. It has 10 evenly spaced marks on the plate around the knob to use as a reference. You need to advance the cutter 1.9 revolutions from your start point to get to the full depth of .061\u201d. Make sure you mark both your start point AND the knob so that you know where you need to stop. Keep the fixture oiled up so that it slides smoothly. I found it was preferable to take cuts of about \u00bd of one of the increments for the knob. It usually took a few passes at each of those for it to \u201cclean up\u201d after each adjustment. Obviously, after you finish one side, you need to complete the same operation on the other.<\/p>\n\n\n\n

\"An
Cutting the rails in the frame. <\/figcaption><\/figure>\n\n\n\n

 After finishing both frame rails, take the frame out of the fixture and use the \u00bc\u201d drill bit to countersink the pinholes you drilled earlier. Be careful as you do this. You don\u2019t want to go too far, just far enough for the pins to sit flush. You\u2019re basically just going to \u201ckiss\u201d the holes with this drill bit, as the aluminum will cut very quickly.<\/p>\n\n\n\n

\"An
Chamfering the pinholes in the drill press. Be careful here! <\/figcaption><\/figure>\n\n\n\n
\"An
Cutting the barrel seat in the frame. <\/figcaption><\/figure>\n\n\n\n

Next, it\u2019s time to cut the barrel seat. Put the frame back in the fixture, this time into the upper pin positions for the next operation. Move the knob and the handle to the other position on the car. Make sure you retract the other cutter out of the way and secure it. The fixture car slides onto the slide rails and has a rubber stop on one end. Like the rail cutting operation, you use the knob to advance the cutter. And like the rail cutting operation, you need to keep the fixture oiled up. You need to advance the cutter 2.4 revolutions to get to the proper depth of .077\u201d. The radius cutter has square ends on it, and if you see those edges beginning to cut-STOP. You\u2019re going too far. Your frame is now complete!<\/p>\n\n\n\n

\"An
The finished barrel seat. <\/figcaption><\/figure>\n\n\n\n

Now that your frame is complete, it\u2019s time to assemble your 1911. Again, details regarding assembly will vary widely based upon not only what configuration 1911 you\u2019re building, but also which specific parts you choose for your build. I would HIGHLY suggest that you do some research if you do not already know how to assemble your 1911. I would also recommend that you obtain a copy of The Colt .45 Automatic: A Shop Manual<\/a><\/em> on the 1911s so that should you run into an unanticipated problem you\u2019ll be able to sort it out. I suspect some of you 1911 folks probably already have this book, as it is invaluable for 1911 work. Since there are a lot of different aspects to assembling a 1911 depending on what specific parts you are using, you will likely find that you need to do some extra work that I didn\u2019t mention. This manual will help you with it.<\/p>\n\n\n\n

Before you begin assembling your pistol, clean all of the chips of metal out of your frame to prevent them from getting into your other parts and binding things up as you\u2019re trying to fit them. If you have built ARs or Glock style pistols (such as the Polymer 80) you will find that 1911s do not typically just go together like those. Usually, a fair amount of fitting is required when assembling a 1911. So if your parts don\u2019t just slide right on, don\u2019t be alarmed, it\u2019s perfectly normal. <\/p>\n\n\n\n

\"An
I needed to fit my slide to the frame. Mark your frame so you can see the contact points. Then remove a little at a time until it fits as it should. <\/figcaption><\/figure>\n\n\n\n

I needed to fit my slide to the frame. If you end up doing the same, you\u2019ll want to put something on your frame and slide so you can see what surfaces need fitting. I used dykem or layout die because I had some, but even a marker will do the trick. I also needed to fit my trigger. In addition, you will also need to install the plunger tube onto your frame (though there are some frames where it\u2019s actually machined into the frame rather than being a separate part that you need to install). This typically requires a special tool to stake it into place. The ejector also bears mentioning. There are a few ways to install the ejector, but there really isn\u2019t a plug and play option that I am aware of. Do not even think<\/em> about putting the ejector in place and trying to cut the pin groove by drilling it- the drill WILL walk and you WILL destroy your frame. So do your homework before attempting to install your ejector. The grip bushings are supposed to be installed with a special tool as well, though I surmise you can probably use a properly fitting screwdriver for this if you exercise some care. All of my other parts installed without any further fitting required-though again, you may not find this to be the case in your build.<\/p>\n\n\n\n

\"An
I had to fit my trigger as well. The plunger tube is supposed to be staked in place. <\/figcaption><\/figure>\n\n\n\n
\"An
The grip bushings have been installed. <\/figcaption><\/figure>\n\n\n\n

Always function test your build without live ammunition to ensure the fire control group is working properly before you attempt to test fire. I use dummy rounds or \u201csnap caps\u201d when doing this to make sure everything else is working as well. When you do test fire, don\u2019t just load up the magazine and go to town. This is especially important when test firing a handgun because you don\u2019t have as much control of it as you do a rifle if something goes wrong. Load one round first. If everything functions properly, and the fired casing doesn\u2019t show any abnormalities, then load two. If everything cycles and functions properly, load three. Once you\u2019ve shot three with no problems, you should be good to go. <\/p>\n\n\n\n

Once you have test fired your pistol and confirmed that it works properly, you\u2019ll want to go back and put some kind of finish on your frame. 1911 parts are predominately steel, and if there isn\u2019t something between the steel parts and your aluminum frame, it will cause you problems in the long run for metallurgical reasons. In case you were wondering, Aluminum cannot be blued or parkerized. However, there\u2019s a lot of other finishes, and there are options intended for hobbyists with a minimum of equipment. Or you could have it anodized. Just make sure you put some kind of finish on it. If you intend to shoot your pistol a lot, I would recommend installing a recoil buffer in it. This will add some additional longevity to the life of your frame-not that you need to be overly concerned about it. I just figure it can\u2019t hurt anything so I use one in non-steel framed 1911s.<\/p>\n\n\n\n

\"An
The completed 1911 is ready to be test-fired. <\/figcaption><\/figure>\n\n\n\n

As you can see, you can build a 1911 from an 80% frame without a lot of expensive equipment. The Stealth Arms Phantom Jig opens the door to homebuilding a 1911 to the hobbyist who doesn\u2019t have a machine shop. You may already have the tools you need to take on a build like this. And even if you don\u2019t you can obtain them for a pretty reasonable amount of money. Building your own firearm is a very satisfying experience. I hope by reading this some of you on the fence about homebuilding see how easy it is to get started and decide to give it a try.<\/p>\n\n\n\n

For more information\u00a0visit Stealth Arms website<\/a>.<\/h2>\n\n\n\n

Buy and Sell on GunsAmerica!<\/a><\/strong><\/h2>\n","protected":false},"excerpt":{"rendered":"

The Phantom Jig really makes it possible for the \u201cgarage builder\u201d or \u201ckitchen table gunsmith\u201d to build a 1911. You need a drill press, a sturdy vise, and some elbow grease. <\/p>\n","protected":false},"author":80,"featured_media":119159,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_specdata_upc":"","_specdata_placement":"","footnotes":""},"categories":[7,1052,888,72,283],"tags":[615,2015,132,201,102,614],"featured":[],"hunt365":[],"class_list":{"0":"post-119145","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-gunsamerica-authors","8":"category-chris-mace","9":"category-columns-ga-guides","10":"category-columns-gunsmithing","11":"category-tools-gunsmithing","12":"tag-615","13":"tag-build-a-gun","14":"tag-buzz","15":"tag-diy","16":"tag-feature-articles","17":"tag-gunsmithing"},"yoast_head":"\nAn 80% 1911 Frame You Can Build in Your Garage<\/title>\n<meta name=\"description\" content=\"An 80% 1911 Frame You Can Build in Your Garage - Chris Mace\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"An 80% 1911 Frame You Can Build in Your Garage\" \/>\n<meta property=\"og:description\" content=\"The Phantom Jig really makes it possible for the \u201cgarage builder\u201d or \u201ckitchen table gunsmith\u201d to build a 1911. You need a drill press, a sturdy vise, and some elbow grease.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/\" \/>\n<meta property=\"og:site_name\" content=\"Gun Reviews and News | GunsAmerica.com\/Digest\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/gunsamerica\" \/>\n<meta property=\"article:published_time\" content=\"2020-02-28T23:48:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-09-06T07:49:36+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"900\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Christopher Mace\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@gunsamerica\" \/>\n<meta name=\"twitter:site\" content=\"@gunsamerica\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Christopher Mace\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/\"},\"author\":{\"name\":\"Christopher Mace\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/person\\\/d947747eb541fa81bad26ba9ea635d9d\"},\"headline\":\"An 80% 1911 Frame You Can Build in Your Garage\",\"datePublished\":\"2020-02-28T23:48:00+00:00\",\"dateModified\":\"2023-09-06T07:49:36+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/\"},\"wordCount\":2180,\"commentCount\":12,\"publisher\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2019\\\/12\\\/completed-pistol.jpg\",\"keywords\":[\"1911\",\"build a gun\",\"Buzz\",\"DIY\",\"Feature Articles\",\"Gunsmithing\"],\"articleSection\":[\"Authors\",\"Chris Mace\",\"GA Guides\",\"Gunsmithing\",\"Tools\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/\",\"name\":\"An 80% 1911 Frame You Can Build in Your Garage\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2019\\\/12\\\/completed-pistol.jpg\",\"datePublished\":\"2020-02-28T23:48:00+00:00\",\"dateModified\":\"2023-09-06T07:49:36+00:00\",\"description\":\"An 80% 1911 Frame You Can Build in Your Garage - Chris Mace\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#primaryimage\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2019\\\/12\\\/completed-pistol.jpg\",\"contentUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2019\\\/12\\\/completed-pistol.jpg\",\"width\":1200,\"height\":900,\"caption\":\"An 80% 1911 Frame You Can Build in Your Garage\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/80-percent-1911-frame-you-can-build-in-your-garage\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"An 80% 1911 Frame You Can Build in Your Garage\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#website\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\",\"name\":\"Gun Reviews and News | GunsAmerica.com\\\/Digest\",\"description\":\"Gun Reviews, Industry News, and Product Reviews for Rifles, Pistols, Revolvers, Shotguns, Optics, and Ammunition. Looking to purchase a firearm online? Look no further than GunsAmerica.com, America's premier destination for buying and selling firearms.\",\"publisher\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#organization\",\"name\":\"GunsAmerica\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/image-3.png\",\"contentUrl\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/image-3.png\",\"width\":286,\"height\":156,\"caption\":\"GunsAmerica\"},\"image\":{\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/gunsamerica\",\"https:\\\/\\\/x.com\\\/gunsamerica\",\"https:\\\/\\\/instagram.com\\\/gunsamerica_official\\\/\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/GunsAmerica\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/#\\\/schema\\\/person\\\/d947747eb541fa81bad26ba9ea635d9d\",\"name\":\"Christopher Mace\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g\",\"caption\":\"Christopher Mace\"},\"description\":\"Christopher Mace enlisted in the US Army as an Infantryman in 2001. He served in the 82nd & 101st Airborne Divisions, with four deployments to Afghanistan & Iraq. Chris started hobby gunsmithing in 2005. After completing his service in 2010, he earned AAS degrees in Machining as well as Welding & Fabrication, and a Gunsmithing Technician Certificate from Trinidad State Junior College. Chris has taken several armorers courses on different firearms, and has built several different types of firearms. He has been collecting & shooting military firearms, old and new since he was 18. Chris enjoys repairing, customizing, building & assembling firearms, as well as different disciplines of competition shooting.\",\"url\":\"https:\\\/\\\/gunsamerica.com\\\/digest\\\/author\\\/christopher-mace\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"An 80% 1911 Frame You Can Build in Your Garage","description":"An 80% 1911 Frame You Can Build in Your Garage - Chris Mace","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/","og_locale":"en_US","og_type":"article","og_title":"An 80% 1911 Frame You Can Build in Your Garage","og_description":"The Phantom Jig really makes it possible for the \u201cgarage builder\u201d or \u201ckitchen table gunsmith\u201d to build a 1911. You need a drill press, a sturdy vise, and some elbow grease.","og_url":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/","og_site_name":"Gun Reviews and News | GunsAmerica.com\/Digest","article_publisher":"https:\/\/www.facebook.com\/gunsamerica","article_published_time":"2020-02-28T23:48:00+00:00","article_modified_time":"2023-09-06T07:49:36+00:00","og_image":[{"width":1200,"height":900,"url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg","type":"image\/jpeg"}],"author":"Christopher Mace","twitter_card":"summary_large_image","twitter_creator":"@gunsamerica","twitter_site":"@gunsamerica","twitter_misc":{"Written by":"Christopher Mace","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#article","isPartOf":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/"},"author":{"name":"Christopher Mace","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/person\/d947747eb541fa81bad26ba9ea635d9d"},"headline":"An 80% 1911 Frame You Can Build in Your Garage","datePublished":"2020-02-28T23:48:00+00:00","dateModified":"2023-09-06T07:49:36+00:00","mainEntityOfPage":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/"},"wordCount":2180,"commentCount":12,"publisher":{"@id":"https:\/\/gunsamerica.com\/digest\/#organization"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#primaryimage"},"thumbnailUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg","keywords":["1911","build a gun","Buzz","DIY","Feature Articles","Gunsmithing"],"articleSection":["Authors","Chris Mace","GA Guides","Gunsmithing","Tools"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/","url":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/","name":"An 80% 1911 Frame You Can Build in Your Garage","isPartOf":{"@id":"https:\/\/gunsamerica.com\/digest\/#website"},"primaryImageOfPage":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#primaryimage"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#primaryimage"},"thumbnailUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg","datePublished":"2020-02-28T23:48:00+00:00","dateModified":"2023-09-06T07:49:36+00:00","description":"An 80% 1911 Frame You Can Build in Your Garage - Chris Mace","breadcrumb":{"@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#primaryimage","url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg","contentUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol.jpg","width":1200,"height":900,"caption":"An 80% 1911 Frame You Can Build in Your Garage"},{"@type":"BreadcrumbList","@id":"https:\/\/gunsamerica.com\/digest\/80-percent-1911-frame-you-can-build-in-your-garage\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/gunsamerica.com\/digest\/"},{"@type":"ListItem","position":2,"name":"An 80% 1911 Frame You Can Build in Your Garage"}]},{"@type":"WebSite","@id":"https:\/\/gunsamerica.com\/digest\/#website","url":"https:\/\/gunsamerica.com\/digest\/","name":"Gun Reviews and News | GunsAmerica.com\/Digest","description":"Gun Reviews, Industry News, and Product Reviews for Rifles, Pistols, Revolvers, Shotguns, Optics, and Ammunition. Looking to purchase a firearm online? Look no further than GunsAmerica.com, America's premier destination for buying and selling firearms.","publisher":{"@id":"https:\/\/gunsamerica.com\/digest\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/gunsamerica.com\/digest\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/gunsamerica.com\/digest\/#organization","name":"GunsAmerica","url":"https:\/\/gunsamerica.com\/digest\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/logo\/image\/","url":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2026\/01\/image-3.png","contentUrl":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2026\/01\/image-3.png","width":286,"height":156,"caption":"GunsAmerica"},"image":{"@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/gunsamerica","https:\/\/x.com\/gunsamerica","https:\/\/instagram.com\/gunsamerica_official\/","https:\/\/www.youtube.com\/user\/GunsAmerica"]},{"@type":"Person","@id":"https:\/\/gunsamerica.com\/digest\/#\/schema\/person\/d947747eb541fa81bad26ba9ea635d9d","name":"Christopher Mace","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/5cc3df7a2cd8d77197f659eb72f7ff2d8cbdba9337fc4f022c153a5d6874a798?s=96&d=mm&r=g","caption":"Christopher Mace"},"description":"Christopher Mace enlisted in the US Army as an Infantryman in 2001. He served in the 82nd & 101st Airborne Divisions, with four deployments to Afghanistan & Iraq. Chris started hobby gunsmithing in 2005. After completing his service in 2010, he earned AAS degrees in Machining as well as Welding & Fabrication, and a Gunsmithing Technician Certificate from Trinidad State Junior College. Chris has taken several armorers courses on different firearms, and has built several different types of firearms. He has been collecting & shooting military firearms, old and new since he was 18. Chris enjoys repairing, customizing, building & assembling firearms, as well as different disciplines of competition shooting.","url":"https:\/\/gunsamerica.com\/digest\/author\/christopher-mace\/"}]}},"featured_image_src":"https:\/\/gunsamerica.com\/digest\/wp-content\/uploads\/2019\/12\/completed-pistol-150x113.jpg","_links":{"self":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/119145","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/users\/80"}],"replies":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/comments?post=119145"}],"version-history":[{"count":4,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/119145\/revisions"}],"predecessor-version":[{"id":186029,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/posts\/119145\/revisions\/186029"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/media\/119159"}],"wp:attachment":[{"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/media?parent=119145"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/categories?post=119145"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/tags?post=119145"},{"taxonomy":"featured","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/featured?post=119145"},{"taxonomy":"hunt365","embeddable":true,"href":"https:\/\/gunsamerica.com\/digest\/wp-json\/wp\/v2\/hunt365?post=119145"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}