![\"Smith](\"https:\/\/www.gunsamerica.com\/digest\/wp-content\/uploads\/2018\/12\/SW-686-LEAD_PHOTO.jpg\" "\\"Smith")
<\/a>The Performance Center Model 686 is the next step in the evolution of a classic wheel gun.<\/p><\/div>\n
The first handgun I owned was a Smith & Wesson revolver. I don\u2019t know how many rounds of .38 Special have been through that old Model 10, but it is somewhere in the thousands\u2013each and every one of them having put a smile on my face. But like most handgunners and shooters in general, I probably spend less than 10% of my range time with a wheel gun in my hand nowadays. The \u201cbottom feeders,\u201d as a friend puts it, have taken over the world. But to this day, nothing catches my eye and makes me stop in my tracks like seeing a beautiful revolver. There is something about wheel guns that evoke a feeling of rustic elegance and craftsmanship that is difficult for a modern semi-automatic to match. That old Model 10 with the pinned barrel (yes, I still have it) taught me to love the feel of the \u201cold school\u201d Smith & Wesson action. This new Model 686 from the Performance Center might just have it beat. The people at the Performance Center have released two new variants of the classic Model 686, one is a six-shot 4\u201d barrel version and the other is a seven-shooter with a 5\u201d barrel. This review is based on the 4-inch version.<\/p>\n
In my garage, safely stowed, is a Chevy Camaro ZL1. Under the hood is a small silver plaque that reads “Chevrolet Performance.” That moniker is far more than a marketing department slap-on sticker. It refers to an independent division of the company that does nothing but make high-performance versions of the brand\u2019s cars. Drive one of each and you\u2019ll immediately feel the difference. So, too, it is with the Performance Center at Smith and Wesson. Their purpose is to take a base model gun and put a master\u2019s touch to its assembly. Sometimes this might just mean extra trigger tuning and exclusive parts\u2014but sometimes it means hand building and cutting, and custom-fit assembly that essentially re-invents the gun and sets it apart from its mass production brethren. I\u2019ve shot a number of 686\u2019s over the years, and they were all good. Some were great. None felt like this one.<\/p>\n The Performance Center 686 has much to boast about, but it all starts with a superb trigger<\/p><\/div>\n For me, the Performance Center (PC) treatment orbits around the feel of the trigger. The action is tuned on each and every gun to improve on what many believe is already the best revolver action in the industry. The action on this example of the 686 is nothing short of excellent. It rolls smoothly and evenly, and I feel no grit or catch in it. Truthfully, it is among the very best I\u2019ve shot. Adding to that experience is the smooth-faced chromed trigger that allows your finger to glide along its arc through the full stroke, and because there is less friction between your finger and the trigger, there is less influence on its break. The tuned action is the most important element of the PC build, but it\u2019s not very visible. Other added elements add not only function but visual aesthetics to the gun.<\/p>\n One of the most noticeable elements of the PC 686 is the vented and ribbed barrel. It dramatically changes the profile of the revolver, making it look more aggressive and more athletic, but it also adds function. The vented rib atop the barrel really does dissipate heat, helping the barrel to run cooler under heavy use, like competition shooting. Sitting atop the vented rib on yet another raised perch is the non-mistakable front sight. This is not your grandfather\u2019s front sight, that\u2019s for sure! This large and very bright orange blade is semi-transparent and makes a highly visible pointer to drop into the rear notch. And if for some reason this one isn\u2019t to your taste, it is replaceable without much effort. Simply drift out a small roll pin and the sight lifts out of the channel that it rests deeply in, and another can be put in its place. I like an orange front sight, so I found it just right. Aft is a fully adjustable rear sight that is blacked out and contains a long ramp that is serrated for anti-glare. Together, they provide an excellent sight picture for both slow or rapid fire.<\/p>\n Smith & Wesson put a championship quality set of sights on the PC 686.<\/p>\n Smith & Wesson put a championship quality set of sights on the PC 686<\/p><\/div>\n Below the barrel, the folks at the PC have given the ejector rod a long and heavy shroud, which tapers all the way to the muzzle. It\u2019s really a sort of quasi-lug, but is lightened by the taper and a right-side \u2018window\u2019 through which part of the ejector rod is visible. I\u2019m convinced this is more about looks than function \u2013 and I\u2019m okay with that. It strikes a handsome profile from both sides. Moving back, the unfluted cylinder is separated from the forcing cone by mere thousandths of an inch. It\u2019s difficult to even see daylight at the gap, ensuring that as little energy as possible will bleed off as the shooter touches off a round. This helps maximize both accuracy and power. The unfluted cylinder itself is becoming something of a signature design element of the Smith PC wheel guns. In the satin stainless-steel finish of the Model 686, it is an integral part of the design.<\/p>\n The ejector rod is protected by a handsome shroud. This is important for a competition gun that might not always be handled delicately.<\/p>\n The ejector rod is protected by a handsome shroud. This is important for a competition gun that might not always be handled delicately.<\/p><\/div>\n One of the new features on the latest Performance Center 686 family is the addition of the extended cylinder release\u2014called the \u201cSpeed Release Thumbpiece\u201d by Smith. This is an in-housing of one of the more popular mods that competitive revolver shooters make to their guns. Smith & Wesson has changed the shape a bit and greatly improved the texture, versus most of the after-market versions. That\u2019s my opinion of course, but that\u2019s what you came here for. The shape mimics that of the hammer spur, which Smith calls teardrop shaped. Reminds me more of an acorn, but toe-may-to\/toe-mah-to. It has very aggressive knurling in a deep diamond pattern to match the hammer spur, and that texture provides fantastic traction.\u00a0 <\/span>And finally, for the shooter\u2019s hand, there is a very comfortable set of Hogue (or Hogue-inspired, Smith\u2019s specs don\u2019t say) rubber grips.<\/p>\n The non-fluted cylinder enhances the clean finish and draws the eye toward more interesting elements.<\/p>\n The non-fluted cylinder enhances the clean finish and draws the eye toward more interesting elements.<\/p><\/div>\n Shooting the PC Model 686<\/b><\/p>\n As I said above, it all starts with the trigger and the feel of the action. When I pick up a Smith & Wesson revolver, I have expectations. I think of over a century and a half of gun making experience by one of the most iconic and well-respected brands in the industry. Those expectations are high. Like most manufacturing companies, Smith & Wesson has had peaks and valleys. One challenge that the industry as a whole faced was the loss of so much institutional skill and knowledge when many of the \u201cold guys\u201d that made all those wonderful guns during the golden years of the \u201840s through the \u201870s retired and took with them their special touch or undocumented know-how. I put six rounds of .38 Special into the cylinder, leveled the gun on target and set my finger onto the trigger to fire it for the first time\u2026 and I was impressed.<\/p>\n The vented rib does a noticeable job of keeping the barrel cool. The peek-a-boo window for the ejector rod can help prevent debris from becoming lodged in the channel.<\/p>\n The vented rib does a noticeable job of keeping the barrel cool. The peek-a-boo window for the ejector rod can help prevent debris from becoming lodged in the channel.<\/p><\/div>\n The double action is buttery smooth, and the trigger rolls with a consistency and evenness that really caught my attention. I didn\u2019t feel any grit. No tiny catch points in the action. Just a single stroke all the way back until the hammer falls. In fact, I found that most every shot with this gun in double-action is like a surprise break. When I tried to stage the trigger, I actually had trouble doing it \u2013 because the pull is so consistent and smooth throughout, you don\u2019t feel a pause point. The action overall is as smooth as ball bearings and the return spring resets the trigger very nicely. My Lyman digital gauge indicates the trigger to have a DA pull of about 10 \u00bc lbs. and a SA pull around 4 \u00bd lbs. Because I spend so much time riding the reset on semi-autos, I can sometimes have trouble with a DA revolver trigger and cause it to bind. That didn\u2019t happen with this one.<\/p>\n A significant part of the quality of the smooth action is owed to the finely milled cylinder ratchet and impeccable timing.<\/p>\n A significant part of the quality of the smooth action is owed to the finely milled cylinder ratchet and impeccable timing.<\/p><\/div>\n The sight picture is enhanced by not only the glowing orange slab at the muzzle but the all black rear sight with just enough notch to hold that bright front sight where it belongs. I did most of my shooting at around 10 yards and moved back to 20 for rested groups, and found it well sized for those distances. Beyond 25 yards the blade will begin to obscure your bullseye though. This gun is setup for combat and competition.<\/p>\n The sight picture of the PC 686. Yeah, it jumps out at you.<\/p><\/div>\n The best group was this one, produced by Federal .357 Mag from 20 yards<\/p><\/div>\n The .357 Magnum round can make for a long day at the range in many guns. And I\u2019m not just talking about the Airweight snubbies. I\u2019ve shot many full sized .357 Mag guns that left my hand stinging after just a dozen or so shots. This 686 does a wonderful job of mitigating that recoil. The L-frame offers enough size and weight to absorb much of the energy, and the nicely fitted rubber grips act as shock absorbers. I still preferred shooting .38 Special loads with it, but my lip didn\u2019t quiver when I dropped in six magnums.<\/p>\n Rested groups from 20 yards produced good results. All groups were .357 Magnum loads. Allowing for operator error, I like to focus on the best three shots because I think that better represents what the gun and ammo can do. Three of the four tested ammo brands produced groups well under \u00be\u201d. Remington\u2019s 125 gr. was the outlier in the mix. Federal and Fiocchi were a close tie, but I\u2019ve been shooting Federal ammo through Smith & Wesson revolvers so long, that just seems to be a perfect fit.<\/p>\n Just My Opinion<\/b><\/p>\n The new pair of Model 686\u2019s from the Performance Center at S&W are far more than a directive from the marketing department to add more SKUs to the catalog. I find them to be highly eye-catching in their design, and the 4\u201d that I tested is just about perfection in revolver shooting. I like the 4\u201d for its balance and traditional profile, but the 5\u201d that holds 7 shots would make a fine alternative. I can\u2019t recall when I\u2019ve felt a trigger and action that were so well tuned from the factory as it is in this model.<\/p>\n Mixing form and function, the Performance Center must be hiring artists as well as engineers.<\/p>\n Aesthetically, the PC 686 is as fine looking a revolver as I\u2019ve seen. The designers have sculptured this hunk of stainless steel into a graceful harmony of lines and curves. From every angle, there is a different nuance of beauty to appreciate\u2014and yet every element has a practical purpose. To re-visit the automotive analogy, beautiful lines and curves are often the product of necessity, finding better ways to manage weight and air flow. So too is the practical beauty with the PC 686. No part is there simply to look good, and no part is there to function regardless of its appearance. Well, maybe the front sight is a little much for some folks\u2026 but I don\u2019t mind it at all. Bottom line is if I\u2019m allowed to have just one .357 Magnum\u2014this is it.<\/p>\n The barrel rifling and crown are recessed to protect against damage.<\/p>\n The barrel rifling and crown are recessed to protect against damage.<\/p><\/div>\n The precision of the cylinder gap at the forcing cone speaks to Smith’s excellent tolerances.<\/p>\n The precision of the cylinder gap at the forcing cone speaks to Smith’s excellent tolerances.<\/p><\/div>\n The rubber grips provide both a relief from the high-energy .357 magnum round and a comfortable and sure grip.<\/p>\n The rubber grips provide both a relief from the high-energy .357 magnum round and a comfortable and sure grip.<\/p><\/div>\n Visit Smith & Wesson to learn more by clicking HERE<\/a>.<\/p>\n The S&W Performance Center Model 686 is memorable for its high quality. The trigger action rolls smoothly and is among the very best I\u2019ve shot. <\/p>\n","protected":false},"author":13,"featured_media":101294,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_specdata_upc":"","_specdata_placement":"","footnotes":""},"categories":[859,87,42],"tags":[1030,132,102,108,621,208,331,60,101],"featured":[],"hunt365":[],"class_list":{"0":"post-101260","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-gun-reviews-handguns","8":"category-justin-opinion","9":"category-revolvers","10":"tag-1030","11":"tag-buzz","12":"tag-feature-articles","13":"tag-guns","14":"tag-pistol","15":"tag-reviews-2","16":"tag-revolver","17":"tag-smith-wesson","18":"tag-video-2"},"yoast_head":"\n<\/a><\/p>\nPerformance Center Built<\/b><\/h3>\n
<\/a><\/a><\/p>\n<\/a><\/a><\/a><\/a><\/a><\/a><\/a><\/a><\/p>\n<\/a><\/a><\/a>***Shop GunsAmerica for a S&W Performance Center Model 686***<\/a><\/b><\/h2>\n","protected":false},"excerpt":{"rendered":"