Search: casting bullets

Moreover, what are you going to do, just run into the wild? Forever? What about everyone else who planned to do that?

Morgan, who was famously decimated by Ben Shapiro for his views on firearms, asked the President what was being done to stop firearm-related mass murders in the U.S.

It may seem that a lot of guns are full of innovation. They really aren’t. We jabber about them and pretend that they are exciting, but at the end of the day, it’s more of the same old stuff. I love the new details and features as much as the next guy, but this guy Brian has introduced some innovation that nobody else out there is even working on. In this video you’ll find a reloading system for all of the .22 rimfires. There is also a DIY percussion cap maker, and a system to reprime Berdan with standard boxer primers. Some of these products are already in house for individual review, but I’ll cover the basics here.

I have always been a fan of the .44 Magnum, not because it is the biggest boy on the block (it’s not), but because you can always get ammo for it, and it’s easy and cheap to reload. But probably the biggest strength of the .44 Mag is that you can get ammo at most any gun shop, and even at Walmarts that still carry ammo. To me that outweighs the little bit of extra power you can get with guns that are more powerful, and that have much more expensive and rare ammo. I think every gun accumulation should have a .44 Mag in it. And if you can afford one of the top name (and price) brands, you should consider them. But if you’re on a budget, I have found that this new generation of Taurus products are extremely high quality. The Model 444 Raging Bull 44 Mag .has been around for a generation at this point, and at a street price of under $700, I thought it was worth a new look and a range test. After a couple hundred rounds downrange, the gun did not disappoint. The Raging Bull is a handful, to hold and to shoot, but if you are in the market for a .44 Mag, I think you’d be surprised by this big Taurus stainless steel revolver.

CZ is not the first name in American hunting rifles, but I think they need more love. This 557 in .30-06 is rock solid, dependable, and as accurate as any rifle you’ll find on the shelf at any mom-and-pop gun store in America. It is time these rifles get the respect they so obviously deserve.

With the scarcity of ammo still unresolved, many are thinking about getting into reloading. However, it can require a big investment to try, especially these days with limited availability of components like powder, bullets and primers. And the equipment needed can be prohibitively expensive. So where should you start? Is there an easy and inexpensive way to try your hand at the art of reloading without taking out a second mortgage? There is: the Lee Reloader.

If you like small guns, you’ll find the Bond Arms derringer both capable and versatile. Its capabilities stem from the fact that it’s not as punishing to shoot as you might expect. In fact, controllability and shootability are very good with every caliber shot for this review. Its versatility stems from the wide selection of barrels, calibers and grips available. Whichever of the eight models you select initially (nine including their new Backup model), you can add barrels and grips to turn it into any of the other models. Mix and match grips and barrels to customize it to your needs. Bond Arms’ price list shows a total of 21 barrels capable of firing 17 different calibers. Their 3” barrel, their most versatile, is available in .22LR, .22Mag, .327 fed mag, 9mm, .357/.38spl., .40 S&W, 10mm, .44spl., .44/40, .45GAP, .45ACP, .45Colt, and .45/.410 (2 ½” chamber). However, as in most guns that serve multiple needs, it does some things better than others. I toured the factory in Granbury, Texas, USA, with owner and president Gordon Bond to see just how these guns are made. With the exception of the 400 series stainless steel forgings from which the guns are machined, all the work is done in-house. It may be a small company, but that doesn’t mean they don’t use state-of-the-art equipment to ensure their high quality standards. From numerically controlled milling machines operating down to less than ten thousandths of an inch accuracy, to robotic arms which provide precision and repeatability in surface preparation, to the artistry of individual experts who assemble, polish, and time the  function of the finished product — quality is their principal driver.

As ammo has gotten more and more expensive over the past few years, a lot of people have begun to consider re-loading, and well they should. Because when you buy loaded ammunition, part of what you are paying for is the bullet you shoot downrange and the powder and primer that burn, and part of that cost is also the brass case. Re-loading, or for the purpose of discussion here, “handloading,” allows you to reuse that brass case for more loaded rounds, thereby saving you money on re-buying the brass. Not all cases are brass of course. These days some cases are aluminum or steel, and these generally cannot be reloaded (That is why steel and brass cased ammo is cheaper). But almost all brass ammunition is capable of being re-loaded, and when you get right down to it, brass ammo was created to reload. Leaving brass on the ground is just plain old wasting, and these days who can afford that?